曲げ用木型
基準線
カッター刃
無い場合は上司に連絡
切断する方は片側か両側か方向を確認する
木型又は切断寸法一覧表で確認する
ワークが木型上に確実に乗っいる事を確認して罫引く
切断端面が真直（ナナメで無い事）を確認する
切断初品のチェック
ワークの材質確認
切断寸法の確認
手切り切断機のストッパーセット
テスト切断
ワークの寸法確認
切断作業
現品票又は、早見表にて材質を確認し材料を用意する
現品票又は、早見表にてワークの切断長を確認する
ストッパーの目盛りを切断長 に合わせ、ロックをしっかり 止める
Rating
52
Translation / English
- Posted at 22 May 2015 at 13:47
Bending, wooden model
Base line
Cutter blade
When there is nothing, contact your boss
As for the cutting direction, confirm whether to cut one side or both sides.
Confirm with a wooden model or cutting dimensions table. Confirms that a work is certainly on a wooden model, and pull a ruled line.
Confirm that the cut end face is straight (not oblique).
Check the first article cut.
Work materials confirmation
Confirmation of cutting dimensions
Stopper setting of the hand cutting machine
Dimensions confirmation of a work
Cutting work
Confirm the material quality with the identification tag or the chart, and prepare materials.
Confirm the cut length with the identification tag or the chart.
Adjust the scale of the stopper to the cut length, and stop the lock firmly.
Base line
Cutter blade
When there is nothing, contact your boss
As for the cutting direction, confirm whether to cut one side or both sides.
Confirm with a wooden model or cutting dimensions table. Confirms that a work is certainly on a wooden model, and pull a ruled line.
Confirm that the cut end face is straight (not oblique).
Check the first article cut.
Work materials confirmation
Confirmation of cutting dimensions
Stopper setting of the hand cutting machine
Dimensions confirmation of a work
Cutting work
Confirm the material quality with the identification tag or the chart, and prepare materials.
Confirm the cut length with the identification tag or the chart.
Adjust the scale of the stopper to the cut length, and stop the lock firmly.
Rating
57
Translation / English
- Posted at 22 May 2015 at 13:22
Wood pattern for bending
Reference line
Cutter blade
Contact the boss if above tools are missing
Check the cutting direction; one side or both sides
Check it with the wood pattern or the cutting dimension list
Make sure that the work is surely on the wood pattern and then draw the ruling line
Confirm that the cutting edge is straight (not slant)
Check of the first-cut product
Check of the material of the work
Check of cutting size
Stopper set of manual cutting machine
Test cutting
Size check of the work
Cutting operation
Check the materials with the identification tag or the checksheet, and prepare them
Check the cut length of work with the identification tag or the checksheet
Align the scale of stopper with the cut length, and stop the lock firmly
Reference line
Cutter blade
Contact the boss if above tools are missing
Check the cutting direction; one side or both sides
Check it with the wood pattern or the cutting dimension list
Make sure that the work is surely on the wood pattern and then draw the ruling line
Confirm that the cutting edge is straight (not slant)
Check of the first-cut product
Check of the material of the work
Check of cutting size
Stopper set of manual cutting machine
Test cutting
Size check of the work
Cutting operation
Check the materials with the identification tag or the checksheet, and prepare them
Check the cut length of work with the identification tag or the checksheet
Align the scale of stopper with the cut length, and stop the lock firmly
Rating
50
Translation / English
- Posted at 22 May 2015 at 12:56
Wooden Mold for Bending
Reference line
Cutter blade
Contact the boss if there is none
Confirming the cutoff direction whether it is one end or both ends
Check the wooden mold or the Cutoff Measurement Chart
Make certain that the work is mounting on the wooden mold when drawing the rule lines
Confirm the cut surface end is straight (not askew)
Check out the cut goods
Confirmation of work material
Confirmation of cut measurements
Stopper set for hand cutting machine
Test cutting
Confirmation of work sizes
Cutting operation
Use the Identification tag and/or the Quick Reference Chart to prepare the confirmed material
Use the Identification tag and/or the Quick Reference Chart to check the cutting length of the work
Align the cutting length with the stopper scale and firmly lock it
toyoutoyou likes this translation
Reference line
Cutter blade
Contact the boss if there is none
Confirming the cutoff direction whether it is one end or both ends
Check the wooden mold or the Cutoff Measurement Chart
Make certain that the work is mounting on the wooden mold when drawing the rule lines
Confirm the cut surface end is straight (not askew)
Check out the cut goods
Confirmation of work material
Confirmation of cut measurements
Stopper set for hand cutting machine
Test cutting
Confirmation of work sizes
Cutting operation
Use the Identification tag and/or the Quick Reference Chart to prepare the confirmed material
Use the Identification tag and/or the Quick Reference Chart to check the cutting length of the work
Align the cutting length with the stopper scale and firmly lock it
翻訳していただき、本当にありがとうございました。
いいえ、どういたしまして。 Just glad to be of help.