容器内部に出す圧力を利用して逆洗を行います。
AUTO VALVEを開放した時の大気開放の圧力差によって内部の流体を引っ張ります。
ギアモーターがぐるぐる回り、ブラシでエレメントの表面を擦りながら逆洗をします。
ブラシで表面を掻き取ることによって逆洗の効率を高めることができます。
左の平面図を見ていただくとわかりますが、エレメント円周のほんの一部を逆洗するので、
濾過を止めること無く逆洗できます。
ブラシがエレメントに対して動き、ノズルから異物を吸い込むという機構になっています。
Rating
50
Translation / English
- Posted at 20 Aug 2021 at 13:31
You can wash the other way by using the pressure the container puts out.
By the atmosphere to go out of which pressure difference when Auto Valve is opened, you can pull the inner blow toward you.
You can wash the other way by feeling the surface of the element with a brush when the gear motor turns.
You can have the effect of washing the other way by scratching the surface with a brush.
You can see the right side's plan, as you wash the element's only bit to wash the other way, you can wash without filtrating.
It is to be vacuumed foreign substances from the nozzle, when the brush moves to the element.
By the atmosphere to go out of which pressure difference when Auto Valve is opened, you can pull the inner blow toward you.
You can wash the other way by feeling the surface of the element with a brush when the gear motor turns.
You can have the effect of washing the other way by scratching the surface with a brush.
You can see the right side's plan, as you wash the element's only bit to wash the other way, you can wash without filtrating.
It is to be vacuumed foreign substances from the nozzle, when the brush moves to the element.
Rating
44
Translation / English
- Posted at 20 Aug 2021 at 13:26
Backwashing is performed using the pressure applied to the inside of the container.
When the AUTO VALVE is released, the pressure difference in the atmosphere release causes the internal fluid to be pulled.
The gear motor turns round and round, and the brush is used to wash back while rubbing the surface of the element.
You can increase the efficiency of backwashing by scraping off the surface with a brush.
As you can see in the top view on the left, we are backwashing a small part of the circumference of the element.
Can be backwashed without stopping filtration.
The brush moves against the element and sucks foreign matter from the nozzle.
When the AUTO VALVE is released, the pressure difference in the atmosphere release causes the internal fluid to be pulled.
The gear motor turns round and round, and the brush is used to wash back while rubbing the surface of the element.
You can increase the efficiency of backwashing by scraping off the surface with a brush.
As you can see in the top view on the left, we are backwashing a small part of the circumference of the element.
Can be backwashed without stopping filtration.
The brush moves against the element and sucks foreign matter from the nozzle.
Rating
50
Translation / English
- Posted at 20 Aug 2021 at 13:28
Backwashing is performed by using the pressure exerted inside the vessel.
The pressure difference of the atmosphere release when the AUTO VALVE is opened pulls the fluid inside.
The gear motor goes around and around, scrubbing the surface of the element with a brush as it backwashes.
By scraping the surface with the brush, the efficiency of the backwash can be increased.
As you can see in the plan view on the left, only a small portion of the element circumference is backwashed.
It is possible to backwash without stopping the filtration.
The brush moves against the element and sucks in foreign matter from the nozzle.
The pressure difference of the atmosphere release when the AUTO VALVE is opened pulls the fluid inside.
The gear motor goes around and around, scrubbing the surface of the element with a brush as it backwashes.
By scraping the surface with the brush, the efficiency of the backwash can be increased.
As you can see in the plan view on the left, only a small portion of the element circumference is backwashed.
It is possible to backwash without stopping the filtration.
The brush moves against the element and sucks in foreign matter from the nozzle.
![[deleted user]](https://secure.gravatar.com/avatar/695023b4efd563721d13716b1457bc73.png?d=identicon&mode=crop&r=PG&s=42)
Rating
52
Translation / English
- Posted at 20 Aug 2021 at 13:42
The backwash is performed using pressure to put out the inside of the container.
Pulling the liquid internally is to pull by the difference of pressure the open atmospheric system when opening the auto valve.
The backwash is done by rotating the gear motor and rubbing the surface of the element by brush.
By scraping off the surface by brush, the effectiveness of the backwash increases.
As you see a ground plan, you will understand that a part of element circumference is back washed, so the backwash can be continually performed without halting filtering.
This functions that the brush moves towards element, and the nozzle vacuums foreign substance.
Pulling the liquid internally is to pull by the difference of pressure the open atmospheric system when opening the auto valve.
The backwash is done by rotating the gear motor and rubbing the surface of the element by brush.
By scraping off the surface by brush, the effectiveness of the backwash increases.
As you see a ground plan, you will understand that a part of element circumference is back washed, so the backwash can be continually performed without halting filtering.
This functions that the brush moves towards element, and the nozzle vacuums foreign substance.
