21から始まる5桁のシリアルです。
コントロールの裏パネルと、ストラップピンエンドのナットが恐らく交換されております。
フィニッシュはオリジナルです。
現状で演奏上の問題はございませんが、弦アースがございませんのでノイズが発生致します。
これはオリジナルの仕様ですので、必要に応じてテールピースなどから弦アースをとる必要があるかと思います。
委託品となっており、プライバシーの関係でネックデイトとシリアルナンバーをお教えすることができません。
お力になれず申し訳ありません。
Rating
52
Translation / English
- Posted at 14 Jul 2015 at 13:06
It is a 5 digit serial starting with 21.
I am afraid that the back panel and the strap pin end's nut are interchanged.
The finish is original.
There are no problems with the performance right now, but it produces noise because there is no string ground.
This is the original specification so there is a need to change the tail piece to a string ground.
It is a consignment product and we cannot inform you on the neck date and the serial number due to privacy.
We are sorry that we could not be of help.
I am afraid that the back panel and the strap pin end's nut are interchanged.
The finish is original.
There are no problems with the performance right now, but it produces noise because there is no string ground.
This is the original specification so there is a need to change the tail piece to a string ground.
It is a consignment product and we cannot inform you on the neck date and the serial number due to privacy.
We are sorry that we could not be of help.
★★★☆☆ 3.0/1
Rating
50
Translation / English
- Posted at 14 Jul 2015 at 13:08
It is a 5 digit serial number that starts at 21.
Probably back panel at control and nut of strap pin end are exchanged.
The finishing has not been changed.
We do not have a problem in performing it.
However, as there is no chord earth, it causes a noise.
As it is an original specification, we have to take the chord earth from the tale piece if necessary.
As it is entrusted by other, we cannot tell you the neck date and the serial number due to privacy reason.
We apologize that we cannot be of your help.
Probably back panel at control and nut of strap pin end are exchanged.
The finishing has not been changed.
We do not have a problem in performing it.
However, as there is no chord earth, it causes a noise.
As it is an original specification, we have to take the chord earth from the tale piece if necessary.
As it is entrusted by other, we cannot tell you the neck date and the serial number due to privacy reason.
We apologize that we cannot be of your help.
★★★★☆ 4.0/1
Rating
52
Translation / English
- Posted at 14 Jul 2015 at 13:12
It is a 5 digit serial number starting with 21.
Back panel of the control and the nut on the strap pin end have most likely been replaced.
The finish is the original.
The current condition does not have any problems for playing but since it does not have a string ground, there are some noises.
Since this is the original specification, if you need to ground you may need to utilize the tail piece or something.
This is a consignment item and cannot give you the date on the neck and the serial number to protect the privacy of the current owner.
I am sorry that I cannot help you more.
Back panel of the control and the nut on the strap pin end have most likely been replaced.
The finish is the original.
The current condition does not have any problems for playing but since it does not have a string ground, there are some noises.
Since this is the original specification, if you need to ground you may need to utilize the tail piece or something.
This is a consignment item and cannot give you the date on the neck and the serial number to protect the privacy of the current owner.
I am sorry that I cannot help you more.
Rating
43
Translation / English
- Posted at 14 Jul 2015 at 13:04
It is a five-digit serial beginning with 21.
The back panel of the control and strap pin end of nut it probably been exchange.
Finish is the original.
There is no performance problems in the current situation, but noise will occur because it does not have a ground string.
Because it is the original specification, I think there is necessary to take the strings from the ground, such as the tail piece if needed.
It has become a consignment, I will not be able to teach a neck date and serial number in the privacy of the relationship.
I am sorry because it is not accustomed to my power.
The back panel of the control and strap pin end of nut it probably been exchange.
Finish is the original.
There is no performance problems in the current situation, but noise will occur because it does not have a ground string.
Because it is the original specification, I think there is necessary to take the strings from the ground, such as the tail piece if needed.
It has become a consignment, I will not be able to teach a neck date and serial number in the privacy of the relationship.
I am sorry because it is not accustomed to my power.
