ポンプヘッドの黒の部分を押さえながら、シルバー部分を反時計周りに廻して引っ張り出し、完全に伸びた状態にします。
ポンプヘッドを自転車のバルブに挿入し、時計回りに回してバルブに固定してからポンピングします。
ポンプヘッドが斜めになっていると空気漏れ・バルブ損傷の原因になるため垂直に挿入してください。
Rating
50
Translation / English
- Posted at 24 Mar 2019 at 09:36
While pressing the head of the pomp, pulling by rounding to the opposite direction of clock with the silver part, and keep it completely in a stretched state.
Putting the pomp head into the bicycle's bulb, and after turning to clock and fix to the bulb, and then pump.
When the pump head is not straight, air leakage and bulb damage occur, and so please put into it in vertical position.
Putting the pomp head into the bicycle's bulb, and after turning to clock and fix to the bulb, and then pump.
When the pump head is not straight, air leakage and bulb damage occur, and so please put into it in vertical position.
Rating
50
Translation / English
- Posted at 24 Mar 2019 at 09:44
Hold the black part of the pump head and rotate the silver part anticlockwise and pull it out, then make it in a state it is completely stretched out.
Insert the pump head in the bicycle valve, then start pumping after fixing it to the valve by rotating clockwise.
Ensure to insert the pump head perpendicularly because if it is inserted diagonally it could be the cause of air leakage/valve damage.
z2080047 likes this translation
Insert the pump head in the bicycle valve, then start pumping after fixing it to the valve by rotating clockwise.
Ensure to insert the pump head perpendicularly because if it is inserted diagonally it could be the cause of air leakage/valve damage.
