NEOCA SVのZUNOW45mm f1.8をL39マウント化したものです。
レンズはわずかなクリーニングマークはありますが曇りやカビなど無く綺麗です。
撮影結果には影響しませんでした。
表面のコーティングは少し荒れが数か所見受けられますがこれも強力なLEDライトでわかる程度です。。
レンズの前ブロックは両面クリーニングしましたが、古いものですのでほんの少しホコリがは入っていると思ってください。
レンズ後ブロックは分解清掃しました。
Rating
52
Translation / English
- Posted at 22 Sep 2018 at 14:40
The one that’s made L39 mount of NEOCA SV’s ZUNOW45mm f1.8.
The lense has a slight cleaning mark yet is clear and nice with no mold on it.
It didn’t affect the shooting result.
As for the coating on the surface, there are several spots that are little rough but they are only seen in strong LET light...
For the front block of the lense, I cleaned up on both sides but since it’s old, there could be a little bit of dust in it.
Also, I disassembled the block back of the lense and cleaned it up.
The lense has a slight cleaning mark yet is clear and nice with no mold on it.
It didn’t affect the shooting result.
As for the coating on the surface, there are several spots that are little rough but they are only seen in strong LET light...
For the front block of the lense, I cleaned up on both sides but since it’s old, there could be a little bit of dust in it.
Also, I disassembled the block back of the lense and cleaned it up.
Rating
50
Translation / English
- Posted at 22 Sep 2018 at 14:39
Here is ZUNOW45mm of NEOCA SV mounted on L39.
Although the lenses have some little cleaning mark, it is beautiful without any fog, mold and the like.
It did not affect the shooting outcome.
On the surface coating, there are some rough spots but they are visible under a strong LED light.
The block in front of the lenses were both cleaned, but please be aware that a little dusts are in there.
The block behind the lenses were disassembled and cleaned.
Although the lenses have some little cleaning mark, it is beautiful without any fog, mold and the like.
It did not affect the shooting outcome.
On the surface coating, there are some rough spots but they are visible under a strong LED light.
The block in front of the lenses were both cleaned, but please be aware that a little dusts are in there.
The block behind the lenses were disassembled and cleaned.
Rating
51
Translation / English
- Posted at 22 Sep 2018 at 14:42
This is a L39 Mounted version of NEOCA SV's ZUNOW45mm f1.8.
There are some cleaning marks on the lenses, but are still beautiful without molds and tarnished signs.
There are no noticeable effects on the shooting results.
There are some points where the surface coatings are desolated, but this is the result of viewing under strong LED Lights.
Both side of the front block of the lenses were cleaned, but since they are old, please keep in mind that there might be some dusts inside.
The back block of the lenses was disassembled and cleaned
There are some cleaning marks on the lenses, but are still beautiful without molds and tarnished signs.
There are no noticeable effects on the shooting results.
There are some points where the surface coatings are desolated, but this is the result of viewing under strong LED Lights.
Both side of the front block of the lenses were cleaned, but since they are old, please keep in mind that there might be some dusts inside.
The back block of the lenses was disassembled and cleaned
絞りはきれいに作動しております。
ドナーのヘリコイド、マウント部は50ｍｍですので距離連動はしません。
レンズ鏡胴前部にメッキの少し荒れがあります。
このメーカーのメッキの質が悪いことご承知おきください。
ドナーヘリコイドのインフストップはLMカプラーと干渉したので外してあります。
基本的に無鏡カメラでの使用となります。
開放ではやわらかく周辺怪しく、少し絞るとピンが立ちます。
描写はサンプルご参照願います。
ほぼ新品のプロテクターフィルター付きます
Rating
55
Native
Translation / English
- Posted at 22 Sep 2018 at 16:26
The aperture operates cleanly.
The mound part of the donor helicoid js 50 mm therefore does not do range coupling
The plating in front of the lens mirror body is a little rough.
Please understand that this manufacturer's plating has bad quality.
The donor helicoid's in F stop interferes with the LM coupler so it was removed.
Basically it will be used as a mirrorless camera.
It opens softly. The circumference looks dangerous. Just a little squeeze raises a ping.
For its image capture, please refer to the sample.
It comes with an almost new protector filter.
The mound part of the donor helicoid js 50 mm therefore does not do range coupling
The plating in front of the lens mirror body is a little rough.
Please understand that this manufacturer's plating has bad quality.
The donor helicoid's in F stop interferes with the LM coupler so it was removed.
Basically it will be used as a mirrorless camera.
It opens softly. The circumference looks dangerous. Just a little squeeze raises a ping.
For its image capture, please refer to the sample.
It comes with an almost new protector filter.
Rating
50
Translation / English
- Posted at 22 Sep 2018 at 14:51
The diaphragm works fine.
The donor's helicoid and mount parts are 50 mm so they don't work along with distance.
The front part of lenses barrel have some areas with a rough metal plate.
Please be aware that this manufacturer's metal plate is of bad quality.
The inflation stop of the donor helicoid is removed as it had friction.
The basic use of it would be without mirror.
At the opening it comes out softly with the surrounding looking mysterious, and narrowing the focus slightly would make the pin stands out.
Please refer to the sample for the depiction.
It comes with an almost new protector filter.
The donor's helicoid and mount parts are 50 mm so they don't work along with distance.
The front part of lenses barrel have some areas with a rough metal plate.
Please be aware that this manufacturer's metal plate is of bad quality.
The inflation stop of the donor helicoid is removed as it had friction.
The basic use of it would be without mirror.
At the opening it comes out softly with the surrounding looking mysterious, and narrowing the focus slightly would make the pin stands out.
Please refer to the sample for the depiction.
It comes with an almost new protector filter.
