①echo machine を発送しました。プラグ、変圧器、替えのテープはmachineに同梱して送るつもりでしたが、明日別便にて発送することになりました。どちらも同じくらいのタイミングで到着すると思いますので、もう少しお待ちください。②新品のテープに取り替える場合は30分ほど回してヘッドとのなじみが出来れば安定したサウンドが得られますよ。③音の機械への入力は、音が歪まない範囲でメーターが振り切れるぐらいまで入れ、AMP側で絞って使うのがノイズの少ない使い方です。
Rating
53
Translation / English
- Posted at 15 Sep 2015 at 17:49
①We've ship the echo machine. Plug, transformer and replacing tape that were supposed to be shipped together with the machine will be shipped separately tomorrow. Both of them should arrive almost at the same timing. We appreciate your patience. ② When replacing the tape, you should first wind it for about 30min. until it conforms to the head so that you can get a stable sound. ③In order to reduce noises, you should input sound into the machine until the meter scales out, trying not to distort the sound wave and turn it down by the AMP.
Rating
52
Translation / English
- Posted at 15 Sep 2015 at 17:37
①I have shipped the echo machine. I was supposed to include the plug, power transformer and new tape for exchange but let me send them to you separately tomorrow. Please be patient a bit more as they will arrive around the same timing. ② If you are to change to new tape, please turn that around for 30 minutes and then you will get stable sounds as the tape will match with the head by this. ③ How to use with least noise is to input the noise as much as the meter will about to go over the limit but the sound should not be cracking, and then to tune down using AMP.
Rating
50
Translation / English
- Posted at 15 Sep 2015 at 17:52
①The echo machine has been shipped.We were thinking to send machine including plug, transformer, altered tape, but now it is decided to send by separate post tomorrow.I think both will arrive at the same time .so please wait a little more.②If you replace with new tape and turn the familiar head about 30 minutes ,it obtains stable sound.③Input of sound machine,put the incline sound to the extent that will shake off the meter,and It is a simple way of using noise to squeeze in AMP side
