まず容器の素材をガラスからアクリルに変更します。
前述の通り容器の重さは移動時にネックとなります。
また、地下での作業はカビの問題もあります。
あなたの過去の発言では高温下でカビの発生は抑えられるとのことでしたが容器を常時湿らせた状態で空気の滞留が起きますと40度近い状態でもカビが確認できました。
故に今後は別の階に小型の温室を作成し、その中に3,4台の容器を入れ管理を行う予定です。
それとご提示の料金が前回よりもだいぶ高めの金額となっておりますがその違いをご説明いただけますか？
Rating
50
Translation / English
- Posted at 18 Jun 2018 at 19:09
First I will change material of container from glass to acryl.
As was explained before, weight of the container is a problem.
In addition, we have a problem of mold when they work in basement.
You said that we can prevent occurrence of the mold at high temperature.
But if air is stagnated with the container humid all the time, I confirmed that the mold occurs at nearly 40 degrees.
Therefore, I will make a small greenhouse on another floor, put 3 or 4 containers in it and control them. The price you suggested is far higher than the last time. Would you explain the difference?
As was explained before, weight of the container is a problem.
In addition, we have a problem of mold when they work in basement.
You said that we can prevent occurrence of the mold at high temperature.
But if air is stagnated with the container humid all the time, I confirmed that the mold occurs at nearly 40 degrees.
Therefore, I will make a small greenhouse on another floor, put 3 or 4 containers in it and control them. The price you suggested is far higher than the last time. Would you explain the difference?
Rating
52
Translation / English
- Posted at 18 Jun 2018 at 19:09
First of all, please change the material of the container from glass to acrylic.
As mentioned previously, there is a limit to the weight of the container during transportation.
In addition, there is a potential problem with mold since the operation will be conducted underground.
As per your previous comments, the breeding of mold will be limited due to the high temperature. however, we have confirmed that the mold still grows when the container is constantly in a wet condition and the stagnant air is close to 40 degrees Celsius.
As such, we plan to create a small greenhouse on a different floor and will put 3 or 4 containers there to be managed.
Can you also please explain why the proposed payment this round is much higher than last time?
As mentioned previously, there is a limit to the weight of the container during transportation.
In addition, there is a potential problem with mold since the operation will be conducted underground.
As per your previous comments, the breeding of mold will be limited due to the high temperature. however, we have confirmed that the mold still grows when the container is constantly in a wet condition and the stagnant air is close to 40 degrees Celsius.
As such, we plan to create a small greenhouse on a different floor and will put 3 or 4 containers there to be managed.
Can you also please explain why the proposed payment this round is much higher than last time?
Rating
50
Translation / English
- Posted at 18 Jun 2018 at 19:17
First, the material of container changes from glass to acrylic resin.
As mentioned earlier, the weight of container is obstacle when it transfer.
Also, the operation in the basement is the cause of problem of the mold.
In your past opinion, the outbreak of mold can hold under high temperature, but I can verify the mold when the container is got wet, the retention of air, and the temperature is nearly 40 degrees.
Therefore, I'll make the small hothouse in the other floor and put three or four container in it to maintain.
Besides, the price that you show is quite costly, could you explain the difference of them?
As mentioned earlier, the weight of container is obstacle when it transfer.
Also, the operation in the basement is the cause of problem of the mold.
In your past opinion, the outbreak of mold can hold under high temperature, but I can verify the mold when the container is got wet, the retention of air, and the temperature is nearly 40 degrees.
Therefore, I'll make the small hothouse in the other floor and put three or four container in it to maintain.
Besides, the price that you show is quite costly, could you explain the difference of them?
