私たちの提供したプログラムは、デフォルトの状態でモニター機能は開始するようにしています。
ですので、私たちの環境ではAndroid端末で開始ボタンを押さなくてもモニタ機能はすでに開始します。
※デフォルトの状態とは、USERファイルがまだ存在しない状態の事です。
もし、デフォルトで開始しないとするとそれは問題です。
確認ですが、私たちの提供したinstall_all.shを使用してテストしましたか？
Rating
50
Translation / English
- Posted at 22 Mar 2016 at 10:50
Our sponsoring program is to start through touch screen function by default.
For that reason, our environment is touch screen function which will be started without pressing button on Android computer terminal.
It would be a problem if it doesn`t start by default.
I would like to confirm, have you tested our install_all.sh?
For that reason, our environment is touch screen function which will be started without pressing button on Android computer terminal.
It would be a problem if it doesn`t start by default.
I would like to confirm, have you tested our install_all.sh?
Rating
50
Translation / English
- Posted at 22 Mar 2016 at 10:53
With the program we provided, the monitor function will automatically run as default setting. So, with the setting, it is not necessary to press the start button on the Android device in order to start the monitor function.
*default setting means "no user file has been created"
If the monitor function is not running with the default setting, there may be some problem on the device.
To make it clear, have you tested install_all.sh, a file we had provided?
*default setting means "no user file has been created"
If the monitor function is not running with the default setting, there may be some problem on the device.
To make it clear, have you tested install_all.sh, a file we had provided?
Rating
50
Translation / English
- Posted at 22 Mar 2016 at 11:20
Our providing program is so constructed to start with a state of default on the monitor function.
Therefor, the monitor function of an Android terminal under our environment already starts, even if the start button is not pushed.
*A state of the defaults means the state of a USER file being not yet started.
It is a problem if the machine is not started by default.
We want you to make follow confirmation. Have you tested with "install_all.sh" which we have provided?
Therefor, the monitor function of an Android terminal under our environment already starts, even if the start button is not pushed.
*A state of the defaults means the state of a USER file being not yet started.
It is a problem if the machine is not started by default.
We want you to make follow confirmation. Have you tested with "install_all.sh" which we have provided?
Rating
50
Translation / English
- Posted at 22 Mar 2016 at 10:45
The program that we offered starts the function of the monitor in default state. So, even if you don't press the start button the monitor can start functioning with our Android terminal in our circumstances.
※ The default state is a state where the USER file does not exist yet.
If in default it didn't start, that is a problem.
Just for confirmation, did you test it using install_all.sh which we provided?
※ The default state is a state where the USER file does not exist yet.
If in default it didn't start, that is a problem.
Just for confirmation, did you test it using install_all.sh which we provided?
※デフォルトの状態とは、USERファイルがまだ存在しない状態の事です は書き忘れました。訂正させていただきます。
※Default is a state where the USER files still don`t exist yet