設備・治工具
顧客要求
設計図面
お客様視点・製造工程視点から
異常の発生原因
決められた作業手順
図面に従い機械を使って材料に手を加え、一定の形に作る
不良品や手直し品を無くそうとする心構え
何が原因となって異常がおきるか
知識、経験が不足している
規則（手順、モラル）を守らない
体力（健康管理、疲れ、無気力）
作業方法が守られていない
班長
係長
課長
目標達成まで繰り返し
70％低減
～なきこと（絶対ゼロ）
バリ高さは0.3以下
検査基準書適合
合否判定に迷う時
～は無しでも可
レシーバタンク
エバポレータ
コンデンサ
評価
57
翻訳 / 英語
- 2015/04/06 13:42:15に投稿されました
Equipment/ jigs and tools
Customer demand
Design drawing
From the customer point of view/ manufacturing process perspective
Occurrence cause of the failure
Predetermined work procedure
According to the drawing, use a machine and process the material, and make a certain shape
Attitude to get rid of the defective or reworked products
What causes the failure
Knowledge and experience are insufficient
The rules (procedure and moral) are not followed
Physical strength (health management, fatigue, inertia)
Working method is not followed
Group leader
Assistant managerk
Manager
Repeat until the goal
70% reduction
With no ~ (absolute zero)
Burr height is 0.3 or less
Inspection standard adaptation
When you cannot make a judgment
Passed even without ~
Receiver tank
Evaporator
Capacitor
rojoさんはこの翻訳を気に入りました
Customer demand
Design drawing
From the customer point of view/ manufacturing process perspective
Occurrence cause of the failure
Predetermined work procedure
According to the drawing, use a machine and process the material, and make a certain shape
Attitude to get rid of the defective or reworked products
What causes the failure
Knowledge and experience are insufficient
The rules (procedure and moral) are not followed
Physical strength (health management, fatigue, inertia)
Working method is not followed
Group leader
Assistant managerk
Manager
Repeat until the goal
70% reduction
With no ~ (absolute zero)
Burr height is 0.3 or less
Inspection standard adaptation
When you cannot make a judgment
Passed even without ~
Receiver tank
Evaporator
Capacitor
評価
52
翻訳 / 英語
- 2015/04/06 14:00:18に投稿されました
Equipment, jigs and tools
Customer requirements
Drawing of design
From the viewpoint of customers / production process
Cause of failures
Structured working routine
Working over the material to a certain design using the machine by following the drawing
The mindset to eliminate defects and reworks
What causes the failures
Lack of knowledge and experience
Disobedience of rules on procedure and morals
Monitoring health, fatigue and enervation
The working routine not being obeyed
Group leader
Section chief
Manager
Repeat until the goal is achieved
70% reduction
Never ～ (absolutely zero)
Height of burr must be below 0.3
Conformance with the inspection standards
When it is difficult to judge
Acceptable without ～
Receiver tank
Evaporator
Condenser
Customer requirements
Drawing of design
From the viewpoint of customers / production process
Cause of failures
Structured working routine
Working over the material to a certain design using the machine by following the drawing
The mindset to eliminate defects and reworks
What causes the failures
Lack of knowledge and experience
Disobedience of rules on procedure and morals
Monitoring health, fatigue and enervation
The working routine not being obeyed
Group leader
Section chief
Manager
Repeat until the goal is achieved
70% reduction
Never ～ (absolutely zero)
Height of burr must be below 0.3
Conformance with the inspection standards
When it is difficult to judge
Acceptable without ～
Receiver tank
Evaporator
Condenser
評価
50
翻訳 / 英語
- 2015/04/06 13:44:29に投稿されました
Equipment and tooling
Customer request
Design drawings
From the customer point of view and manufacturing process perspective
Cause of the abnormality
Predetermined operation procedure
In addition to treatment the material using a machine according to the drawing, to make a certain shape
With attitude that try to eliminate the defective or rework goods
What is causing the abnormality
Knowledge and experience is insufficient
You do not abide the rules (procedures, moral)
Physical strength (health management, fatigue, lethargy)
Did not followed working methods
Group leader
Chief clerk
Manager
Repeat until the objectives are achieve
70% reduction
～Without it ~ (absolute zero)
Burr height 0.3 or less
Inspection standard is meet
When you get lost in the admission decision
～Yes - even without it
Receiver tank
Evaporator
Capacitor
rojoさんはこの翻訳を気に入りました
Customer request
Design drawings
From the customer point of view and manufacturing process perspective
Cause of the abnormality
Predetermined operation procedure
In addition to treatment the material using a machine according to the drawing, to make a certain shape
With attitude that try to eliminate the defective or rework goods
What is causing the abnormality
Knowledge and experience is insufficient
You do not abide the rules (procedures, moral)
Physical strength (health management, fatigue, lethargy)
Did not followed working methods
Group leader
Chief clerk
Manager
Repeat until the objectives are achieve
70% reduction
～Without it ~ (absolute zero)
Burr height 0.3 or less
Inspection standard is meet
When you get lost in the admission decision
～Yes - even without it
Receiver tank
Evaporator
Capacitor
