非常に良い商品なのですが、1点不思議な現象が起きており、ご連絡させて頂きました。
色調を調整後、電源をOFFにしたり、信号を一旦切ると、数値はそのままのですが、色調が設定前の色に戻ってしまいます。
再度、色調設定で、数値を１つだけでも上げ下げすると設定していた色になります。
毎回、電源を立ち上げる度に、設定をし直さなければならない状態なのですが、アップデートなどで解決可能でしょうか？
または、故障しているのでしょうか？
Rating
44
Translation / English
- Posted at 08 May 2016 at 21:08
It is an extremely good item, but, as I found a strange behavior so that I would like to let you know about it.
After adjusting the color tone, the parameter value remain the same if the power is turned off, but the color tone gets back to the one before adjusting. And, if I adjust it in the color tone setting mode, even with only one increment or decrement on the value, the color tone becomes the one I originally adjusted.
That means, I have to adjust the setting of the color tone again, every time I turn on it. Would it be possible to resolve it by applying the firmware update?
Or, would it be due to a malfunction?
basilgate likes this translation
After adjusting the color tone, the parameter value remain the same if the power is turned off, but the color tone gets back to the one before adjusting. And, if I adjust it in the color tone setting mode, even with only one increment or decrement on the value, the color tone becomes the one I originally adjusted.
That means, I have to adjust the setting of the color tone again, every time I turn on it. Would it be possible to resolve it by applying the firmware update?
Or, would it be due to a malfunction?
![[deleted user]](https://secure.gravatar.com/avatar/695023b4efd563721d13716b1457bc73.png?d=identicon&mode=crop&r=PG&s=42)
Rating
51
Translation / English
- Posted at 08 May 2016 at 21:06
This is a wonderful product but I'm writing this because something odd is happening.
After adjusting the tone of the color, when I power it off the value is the same but the tone returns to the previous color.
When I turn up or down on the color adjustment, it turs to the set color.
Every time I power on, I have to set it again, would it be possible to solve it by updating or something?
Or is it broken?
basilgate likes this translation
After adjusting the tone of the color, when I power it off the value is the same but the tone returns to the previous color.
When I turn up or down on the color adjustment, it turs to the set color.
Every time I power on, I have to set it again, would it be possible to solve it by updating or something?
Or is it broken?
Rating
52
Translation / English
- Posted at 08 May 2016 at 21:05
It is a very good item, but there is one strange phenomenon so I wanted to let you know.
After adjusting color tone, when I turn the power off or turn off the signal once, value stays same but the color tone goes back to the previous setting.
When I adjust color tone by raising or lowering the value by 1, it goes back to the color previously set.
I have to reset every time I turn the power on, is it possible to solve this b updating etc?
Or is it a failure?
basilgate likes this translation
After adjusting color tone, when I turn the power off or turn off the signal once, value stays same but the color tone goes back to the previous setting.
When I adjust color tone by raising or lowering the value by 1, it goes back to the color previously set.
I have to reset every time I turn the power on, is it possible to solve this b updating etc?
Or is it a failure?
