「品質ＫＹＴ」 研修
品質不具合の予測
その為に少ないサンプルで検査を行う為に抜き取り検査等の方法が考えだされた。
但し、安全にかかわる不良、重大な不良は全数検査を行わなければならない。
「お客様の手元に届けてヨシ」 というお墨付き！
初期流動品
初物検査
設計や工程が確立していない時は、工程が不安定なため工程で品質を作りこむことが困難であるため検査によって品質を確保する必要がある。
不良が大きな危害をもたらす場合
安全不良、重大欠点不良防止の為には全数検査を行わなければならない。
解決策１
Rating
37
Translation / English
- Posted at 07 Mar 2015 at 23:04
"Quality KYT" training
Prediction of quality problems
Inspection methods such as extraction in order to perform the inspection in a small sample for that was Dasa thought.
However, failure related to safety, serious defect must be performed total inspection.
Endorsement that "beauty is delivered to the hands of our customers."!
Initial liquidity goods
First fruits inspection
When design and process has not been established, the step is required to ensure the quality by inspection since it is difficult to fabricate the quality unstable for process.
If the defect is bring great harm
Safety defective, in order to prevent serious disadvantages failure has to be done the total inspection.
Solution 1
mmkon likes this translation
Prediction of quality problems
Inspection methods such as extraction in order to perform the inspection in a small sample for that was Dasa thought.
However, failure related to safety, serious defect must be performed total inspection.
Endorsement that "beauty is delivered to the hands of our customers."!
Initial liquidity goods
First fruits inspection
When design and process has not been established, the step is required to ensure the quality by inspection since it is difficult to fabricate the quality unstable for process.
If the defect is bring great harm
Safety defective, in order to prevent serious disadvantages failure has to be done the total inspection.
Solution 1
Rating
52
Translation / English
- Posted at 08 Mar 2015 at 02:05
”Quality K Y T" training course
Forecasting Quality defects
Since Inspection is made using small sample, people come up with sampling inspection method.
However, In case of defects involved in safety and serious ones , total Inspection is needed.
"It is all right to deliver them to customers" from which this is already received as trustworthy ones.
Initial current article
The first inspection
In case that the design and the Process are not established, because it is hard to manage quality due to unstable process,
quality needs to be secured by inspection.
In case that it causes harmful situation;
For prevention from a safety defect and a great deficit , we must make total Inspection.
Solution 1
mmkon likes this translation
Forecasting Quality defects
Since Inspection is made using small sample, people come up with sampling inspection method.
However, In case of defects involved in safety and serious ones , total Inspection is needed.
"It is all right to deliver them to customers" from which this is already received as trustworthy ones.
Initial current article
The first inspection
In case that the design and the Process are not established, because it is hard to manage quality due to unstable process,
quality needs to be secured by inspection.
In case that it causes harmful situation;
For prevention from a safety defect and a great deficit , we must make total Inspection.
Solution 1
Rating
52
Translation / English
- Posted at 08 Mar 2015 at 02:34
Training of ”Quality KYT"
Prediction of quality problems
For it, the inspection method such as sampling inspection etc. have been come up with.
However with defect related to safety or serious defect, it is necessary to perform whole number inspection.
Authorized of ability to deriver to the customer!
Initial liquidity products
First products inspection
Without establishment of the design and process, it is difficult to build a quality because the process is unstable. So it is necessary to keep the quality by inspection.
In case that Defect brings great damage
To prevent defect of safety or serious fault, it is necessary to perform whole number inspection.
Solution 1:
mmkon likes this translation
Prediction of quality problems
For it, the inspection method such as sampling inspection etc. have been come up with.
However with defect related to safety or serious defect, it is necessary to perform whole number inspection.
Authorized of ability to deriver to the customer!
Initial liquidity products
First products inspection
Without establishment of the design and process, it is difficult to build a quality because the process is unstable. So it is necessary to keep the quality by inspection.
In case that Defect brings great damage
To prevent defect of safety or serious fault, it is necessary to perform whole number inspection.
Solution 1:
