[Translation from Japanese to English ] There is a history of neck crack repair and there is also a repair history to...

Original text

ネッククラックのリペア歴が見られ、テールピースのスタッドの傾き修正のリペア歴も見られます。
交換パーツはテールピースとスタッド、フレットになります。
重量は３．１４Ｋｇです。
ケースは９０年代のギブソンの茶色のハードケースになります。

60'になりますので、50'仕様に比べると薄めのネックになっています。
シェイプはUシェイプです。
ネック幅はナット部分で42mm、12Fで53mmです。

Translation / English

There is a history of neck crack repair and there is also a repair history to straighten the stud on the tail piece. Replaced parts are the tail piece, stud and fret.
It weighs 3.14kg.
90's Gibson hard case in brown is included.

since this is from the 60's, it has a thinner neck compared to the products from the 50's.
It is U shaped.
The neck width is 42 mm at the nuts, and 53mm at 12F.

Translation / English

Seen repair history of neck crack, also seen repair history of tilt correction of stud of the tailpiece.
Replacement parts are the tail piece and the stud,fret.
It weighs 3.14Kg.
Case is the hard case of the 1990s Gibson brown.

It is 60',so the specification is more thin neck than specification of 50'.
The shape is a U shape.
Neck width is 42mm(nut part) and 53mm(12F).

Translation / English

I can see there are traces of repairs to a neck crack and repair to the tip of the tail piece stud.
The parts to exchange are the tail piece , the stud, and the fret.
The weight is 3.14 kg.
The case is a 60' it will be a thin neck compared to the 50' method.
The shape is U-shaped.
The neck width is 42mm at the nut, and 53mm at 12F.