ご返事、有難うございます。
160007と16003のサンプル作成をお願いします。
完成しましたら、ＵＰＳでお送りください。
160007の奥行のサイズと、160003のクリップ部分を訂正していただけば、
問題ありませんので、量産をスタートしてください。
最後のマットコーティングを注意して、量産をお願いします。
宜しくお願い致します。
Rating
60
Translation / English
- Posted at 01 May 2013 at 17:04
Please make samples of 160007 and 16003 and send them via UPS when you finish.
Providing corrections of both the depth size of 160007 and the crip on 160003, you may start quantity production.
On quantity production, please be careful with the mat coating finish.
Thank you for your cooperation.
(訳注： １６００３ と １６０００３ があります）
Providing corrections of both the depth size of 160007 and the crip on 160003, you may start quantity production.
On quantity production, please be careful with the mat coating finish.
Thank you for your cooperation.
(訳注： １６００３ と １６０００３ があります）
Rating
55
Translation / English
- Posted at 01 May 2013 at 17:03
Thank you so much for your reply.
Please start the production of the samples for 160007 and 160003.
I would like you to send them by UPS after completion.
If you change the depth of 160007 and modify the clips of 160003, there will be no problem remained and you can get started with the mass production.
Please take care of the final matte coating process in the mass production.
Best regards.
Please start the production of the samples for 160007 and 160003.
I would like you to send them by UPS after completion.
If you change the depth of 160007 and modify the clips of 160003, there will be no problem remained and you can get started with the mass production.
Please take care of the final matte coating process in the mass production.
Best regards.
Rating
50
Translation / English
- Posted at 01 May 2013 at 17:20
Thank you for reply.
Please make samples for 160007 and 160003.
When completed, please ship them via UPS.
After correcting the depth dimension of 160007 and the clip portion of 160003, please start quantity production.
There is no other problem.
Be careful about the “mat” coating at the last stage.
Thank you for your attention in advance.
Please make samples for 160007 and 160003.
When completed, please ship them via UPS.
After correcting the depth dimension of 160007 and the clip portion of 160003, please start quantity production.
There is no other problem.
Be careful about the “mat” coating at the last stage.
Thank you for your attention in advance.
申し訳ございません。頭が抜けました。
Thank you for the reply.
また、 crip は clip でした。