○Melting Deviceを使用した時の作業手順
1.イン側のボルトを2本残してはずす。2本は緩めた後、軽く当たるまで締める。
アウト側のボルトはすべてはずす。
2.アウトレットカバーをはずして、治具を使用して吊り上げる
3.Melting Deviceで加熱し、バンドルを引き抜く
4.ハウジングをMelting Deviceから取り出し、インレットカバーと分解する。
Rating
50
Translation / English
- Posted at 18 Apr 2018 at 08:03
Working process when used ◯ Melting Device
1. 2 bolts inside are remained. After warming the two, it needs to tighten until it comes to touch lightly. All outside bolts should be taken off.
2. By taking off the outlet cover, you hang up using jig.
3. By heating with melting device, you pull off the bundle.
4. After pulling off housing from melting device, take apart from inlet cover.
1. 2 bolts inside are remained. After warming the two, it needs to tighten until it comes to touch lightly. All outside bolts should be taken off.
2. By taking off the outlet cover, you hang up using jig.
3. By heating with melting device, you pull off the bundle.
4. After pulling off housing from melting device, take apart from inlet cover.
Rating
52
Translation / English
- Posted at 18 Apr 2018 at 08:12
Work procedure using Melting Device
1) Unscrew all the bolts from “IN” except two of the bolts. Loosen two remaining bolts then tighten again lightly until it touches the other end. Unscrew all the bolts from “OUT”.
2) Remove outlet cover and lift using a jig.
3) Heat with Melting Device, then pull out the bundle.
4) Take out the housing from Melting Device, then take it apart from inlet cover.
1) Unscrew all the bolts from “IN” except two of the bolts. Loosen two remaining bolts then tighten again lightly until it touches the other end. Unscrew all the bolts from “OUT”.
2) Remove outlet cover and lift using a jig.
3) Heat with Melting Device, then pull out the bundle.
4) Take out the housing from Melting Device, then take it apart from inlet cover.
Rating
50
Translation / English
- Posted at 18 Apr 2018 at 08:05
・procedure in using the Melting Device
1. Delete the bolts of inside except for two pieces. Fasten lightly after loosening the two.
Delete all bolts of outside.
2. Uncover the outlet cover and hang up it with the jig.
3. Heat with the Melting Device and pull the bundle.
4. Take the housing out of the Melting Device and take it apart to the inlet cover.
1. Delete the bolts of inside except for two pieces. Fasten lightly after loosening the two.
Delete all bolts of outside.
2. Uncover the outlet cover and hang up it with the jig.
3. Heat with the Melting Device and pull the bundle.
4. Take the housing out of the Melting Device and take it apart to the inlet cover.
Rating
52
Translation / English
- Posted at 18 Apr 2018 at 07:57
The procedure when using the Melting Device:
1. Remove all the bolts from " in" except for two. Two bolts should be loosened once, then tighten until it clicks. All the "out" bolts should be taken out.
2. Remove the outlet cover. Lift up using the tool.
3. Heat with the Melting Device and remove Bundle.
4. Take the housing from the Melting Device and break down with the inlet cover.
1. Remove all the bolts from " in" except for two. Two bolts should be loosened once, then tighten until it clicks. All the "out" bolts should be taken out.
2. Remove the outlet cover. Lift up using the tool.
3. Heat with the Melting Device and remove Bundle.
4. Take the housing from the Melting Device and break down with the inlet cover.
