Cette méthode permet néanmoins de corriger soi même les gros défauts d'alignement
Posez une règle aluminium de maçon ou une planche de coffrage rectiligne de 4 m de long sur les 2 chandelles
Mettez la règle en appui sur la roue arrière puis sur la roue avant
Pour obtenir un pincement de 0 mm, tournez le volant pour que la règle soit en appui sur les bord avant et arrière de la roue avant
Pour un pincement de x mm, tournez le volant pour que la différence de l'écartement entre l'avant et l'arrière de la jante soit égale à x/2 mm
Pour régler le pincement à la valeur nominale (0 mm), il faut régler la biellette de direction pour que la règle soit en appui sur l'avant et l'arrière de la roue avant
Rating
50
Translation / English
- Posted at 11 Mar 2015 at 14:08
This method however will allow itself even larger misalignments
Ask Mason aluminum ruler or a straight shuttering board 4 meters long and 2 candles
Put the rest in good standing on the rear wheel and the front wheel
For a pinch of 0 mm, turn the steering wheel to the rule to be supported on the leading and trailing edge of the front wheel
For a pinch x mm, turn the steering wheel to the difference in the distance between the front and the back wheel is equal to x / 2 mm
To adjust toe to the nominal value (0 mm), it has to adjust the tie rod for the rule to be supported on the front and rear of the front wheel
Ask Mason aluminum ruler or a straight shuttering board 4 meters long and 2 candles
Put the rest in good standing on the rear wheel and the front wheel
For a pinch of 0 mm, turn the steering wheel to the rule to be supported on the leading and trailing edge of the front wheel
For a pinch x mm, turn the steering wheel to the difference in the distance between the front and the back wheel is equal to x / 2 mm
To adjust toe to the nominal value (0 mm), it has to adjust the tie rod for the rule to be supported on the front and rear of the front wheel
Rating
50
Translation / English
- Posted at 11 Mar 2015 at 07:23
However, this method allows large misalignment self correction.
Pose a mason aluminum ruler or a straight shuttering board of 4 m over both candles.
Lean the ruler over the back wheel, then over the front wheel.
In order to obtain a 0 mm pinch, turn the wheel so that the spacing between the rim's front and back is of x/2 mm.
For nominal value (0 mm) pinch adjustment, the rod has to be set so that the ruler is lent over the front and the back of the front wheel.
Pose a mason aluminum ruler or a straight shuttering board of 4 m over both candles.
Lean the ruler over the back wheel, then over the front wheel.
In order to obtain a 0 mm pinch, turn the wheel so that the spacing between the rim's front and back is of x/2 mm.
For nominal value (0 mm) pinch adjustment, the rod has to be set so that the ruler is lent over the front and the back of the front wheel.
