使用上の注意事項
取り扱いは丁寧か？
乱暴に扱うと変形したり、欠けたり、磨耗したりして計測器を早く痛めてしまう。
正しく真正面で読んでいるか？
目盛と指針の間に少し間隔のある計測器では、見方によって読んだ値が違ってきます。
計測器の足場、姿勢はよいか？
電気計器や秤などを傾けたり足場が不安定な所で使用すると、正しい値を示しません。
保管上の注意事項
計測器を保管する時の手入れはよいか？
錆止めの必要な物は、防錆油を塗る。
検査済み証の表示
測定誤差の要因
測定誤差の事例
お客様迷惑
利益損失
使用方法
Rating
52
Translation / English
- Posted at 28 Feb 2015 at 22:19
Note for usage.
Is a handling attentive?
If you handle viciously, it will distort, lack or abrasion and hurt measuring instrument soon.
Do you read correctly and seriously!
With measuring instrument which has a narrow gap between divisions and indicator, the value will be different how you see.
Is the scaffold and posture of measuring instrument?
If you incline electric meters or scale etc. and use it at the place where the scaffold is unstable, it cannot be indicated correct value.
Note for keeping.
Is the repair good when you keep the measuring instrument?
What is need for rust-proofing is to paint anti-rust oils.
Indication of a proof for inspection done.
Factor of measurement error.
Case of measurement error.
Customer's trouble.
Benefit loss.
Usage.
oka99 likes this translation
Is a handling attentive?
If you handle viciously, it will distort, lack or abrasion and hurt measuring instrument soon.
Do you read correctly and seriously!
With measuring instrument which has a narrow gap between divisions and indicator, the value will be different how you see.
Is the scaffold and posture of measuring instrument?
If you incline electric meters or scale etc. and use it at the place where the scaffold is unstable, it cannot be indicated correct value.
Note for keeping.
Is the repair good when you keep the measuring instrument?
What is need for rust-proofing is to paint anti-rust oils.
Indication of a proof for inspection done.
Factor of measurement error.
Case of measurement error.
Customer's trouble.
Benefit loss.
Usage.
Rating
52
Translation / English
- Posted at 28 Feb 2015 at 22:57
Careful point for its usage
Do you treat it nicely?
If you treat them roughly, it gets modified, chipped, and worn out, which makes the measurement instrument bad quicker.
Do you read properly from the face side?
If there is any gap between the scale and the hand for the instrument, there will be the difference for the reading.
The position of the instrument and the position of how you read is good?
If the position of the electrical instrument or the balance scale is tilted or is stable, then it will not give you the correct value.
Careful points for its storage
How to treat for its storage is good?
If necessary, put the rust prevention.
Showing the proof of its calibration
The source of the measurement error
The example of the measurement error
The trouble for the customer
Profit loss
How to use
oka99 likes this translation
Do you treat it nicely?
If you treat them roughly, it gets modified, chipped, and worn out, which makes the measurement instrument bad quicker.
Do you read properly from the face side?
If there is any gap between the scale and the hand for the instrument, there will be the difference for the reading.
The position of the instrument and the position of how you read is good?
If the position of the electrical instrument or the balance scale is tilted or is stable, then it will not give you the correct value.
Careful points for its storage
How to treat for its storage is good?
If necessary, put the rust prevention.
Showing the proof of its calibration
The source of the measurement error
The example of the measurement error
The trouble for the customer
Profit loss
How to use
