以下の方法を試してみてください。
○わが社で使用しているDavinchiのインストーラをお送りします。
SetUpからインストールしてみてください。WindowsMediaPlayerはインストールされて
いますか？ WindowsMediaPlayerのインストーラーをお送りします。
■ボードの挿入場所
○HDMIボードのスロットは、上から2つ目に挿してください
○ボードの熱対策のために、Bios上でUpper PCIe Slot ZoneのFan Speedを80にあげてください
![[deleted user]](https://secure.gravatar.com/avatar/695023b4efd563721d13716b1457bc73.png?d=identicon&mode=crop&r=PG&s=42)
Rating
52
Translation / English
- Posted at 24 Jan 2019 at 17:49
Please try a way of below.
- I will send you the installer of Davichi we use
Please install from SetUp. Did you install the WindowsMediaPlayer? I will send the installer of WindowsMediaPlayer.
- The place of inserting board
Please insert HDMI board's slot to the second from the above.
For the heat countermeasure of this board, please rise the Fa Speed of Upper PCle Slot 1zone to 80 on Bios.
- I will send you the installer of Davichi we use
Please install from SetUp. Did you install the WindowsMediaPlayer? I will send the installer of WindowsMediaPlayer.
- The place of inserting board
Please insert HDMI board's slot to the second from the above.
For the heat countermeasure of this board, please rise the Fa Speed of Upper PCle Slot 1zone to 80 on Bios.
Rating
50
Translation / English
- Posted at 24 Jan 2019 at 17:43
Please try the following:
○ I am sending you Davinchi installer that we use.
Please install from SetUp. Is WindowsMediaPlayer installed?
I am sending you WindowsMediaPlayer installer.
■ Place to insert on the board
○ Insert to the HDMI board slot, which is the second one from the top.
○ For avoiding the heat issue of the board, please increase the fan speed of Uppoer PCle Slot Zone over the Bios.
○ I am sending you Davinchi installer that we use.
Please install from SetUp. Is WindowsMediaPlayer installed?
I am sending you WindowsMediaPlayer installer.
■ Place to insert on the board
○ Insert to the HDMI board slot, which is the second one from the top.
○ For avoiding the heat issue of the board, please increase the fan speed of Uppoer PCle Slot Zone over the Bios.
Rating
50
Translation / English
- Posted at 24 Jan 2019 at 17:48
Please try the following ways.
◯ We will send Dvinchi installr used by our company.
Please install from setUp. Is there WindowsMediaPPlayer installed?We will send WindowsMediaPlayer.
■Board's input place
◯ HDMIborad slot is pressed the second from the upper side.
◯ To avoid board's heat, Please raise Upper PCle Slot Zone's Fan Sped to 80.
◯ We will send Dvinchi installr used by our company.
Please install from setUp. Is there WindowsMediaPPlayer installed?We will send WindowsMediaPlayer.
■Board's input place
◯ HDMIborad slot is pressed the second from the upper side.
◯ To avoid board's heat, Please raise Upper PCle Slot Zone's Fan Sped to 80.
Rating
50
Translation / English
- Posted at 24 Jan 2019 at 17:46
Please try the following way of use:
○ The installer for Davinchi will be sent to you.
Please try to install from SetUp. Is WindowsMediaPlayer installed in your machine? I will send an installer of WindowsMediaPlayer too.
■The position to insert the board in.
○ Please insert the HDMI board into the second position.
○ To avoid that the board gets over heated, please raise the fan speed of Upper PCIe Slot Zone to 80 on Bios.
○ The installer for Davinchi will be sent to you.
Please try to install from SetUp. Is WindowsMediaPlayer installed in your machine? I will send an installer of WindowsMediaPlayer too.
■The position to insert the board in.
○ Please insert the HDMI board into the second position.
○ To avoid that the board gets over heated, please raise the fan speed of Upper PCIe Slot Zone to 80 on Bios.
Rating
52
Translation / English
- Posted at 24 Jan 2019 at 17:47
Please try the following.
○I send you an installer for Davinchi using at our side at the moment .
Please start installing from setup. Were WindowsMediaPlayer installed already?
I also include an installer for WindowsMediaPlayer.
■Where to insert the boards.
○Insert the HDMI board to the 2nd slot from above.
○Increase fan speed at 80 at Upper PCIe Slot Zone on Bios setting in order to get rid of thermal issue.
○I send you an installer for Davinchi using at our side at the moment .
Please start installing from setup. Were WindowsMediaPlayer installed already?
I also include an installer for WindowsMediaPlayer.
■Where to insert the boards.
○Insert the HDMI board to the 2nd slot from above.
○Increase fan speed at 80 at Upper PCIe Slot Zone on Bios setting in order to get rid of thermal issue.
