明後日の発送を予定しています
Gibson J-45, Gibson ES-345もお取扱いしておりますのでご興味があるのであればアップしますね
商品到着までもう少しお待ちくださいませ
仕様から恐らく1975年製と見られるFlying Vです
ヘッド折れ修正痕がありますが丁寧にリペアさせていて使用上問題ありません
ノブ・POT×3・ピックアップカバー×2・リアピックアップネジ×2・フロントピックアップの高低スプリングはノンオリジナルで交換させています
リアエンドピン位置を変更しています
Rating
52
Translation / English
- Posted at 10 Jul 2015 at 20:14
Shipment will be made the day after tomorrow.
I have Gibson J-45 and Gibson ES-345 as well so if you are interested I'll upload them.
Please kindly wait a little while till the item reaches you.
This is the Flying which is assumed to have made in 1975 from its specifications.
Broken head is corrected but it's carefully repaired, so there is no problem using it.
Knob POT x 3, pickup cover x 2, rear pickup screw x 2, high and low springs of front pickup have been replaced with non original.
Rear end pin position was changed.
I have Gibson J-45 and Gibson ES-345 as well so if you are interested I'll upload them.
Please kindly wait a little while till the item reaches you.
This is the Flying which is assumed to have made in 1975 from its specifications.
Broken head is corrected but it's carefully repaired, so there is no problem using it.
Knob POT x 3, pickup cover x 2, rear pickup screw x 2, high and low springs of front pickup have been replaced with non original.
Rear end pin position was changed.
Rating
51
Translation / English
- Posted at 10 Jul 2015 at 20:13
We will make a shipment the day after tomorrow.
We also handle Gibson J-45 and Gibson ES-345, so we will list up them if you are interested in them.
Please wait for a little while before the product is delivered to you.
It is probably Flying V made in 1975 considering the specification.
Although there is scar of repair with hear broken, it is no problem to be used because carefully repaired.
Nob POT×3, pickup cover×2, rear pickup screw×2, pitch spring of front pickup are not originals and changed without charging.
Rear endpin location is changed.
We also handle Gibson J-45 and Gibson ES-345, so we will list up them if you are interested in them.
Please wait for a little while before the product is delivered to you.
It is probably Flying V made in 1975 considering the specification.
Although there is scar of repair with hear broken, it is no problem to be used because carefully repaired.
Nob POT×3, pickup cover×2, rear pickup screw×2, pitch spring of front pickup are not originals and changed without charging.
Rear endpin location is changed.
Rating
50
Translation / English
- Posted at 10 Jul 2015 at 20:43
It will be due to ship the after tomorrow.
We deal in Gibson J-45, Gibson ES-345 too, if you are interested in, we will exhibit in the net. Please wait a little while until the items reach you.
From the method, maybe it seems to be one in 1975's Flying V.
Though there is a trace of having been repaired but it was done gently, and so there is no problem to use it.
The nob • POT x 3 • the pick up cover x 2 • the rear pick up screw x 2 • the upper or lower spring of the front pick up have been changed to non originals.
The position of the rear end pin will be made alternations.
We deal in Gibson J-45, Gibson ES-345 too, if you are interested in, we will exhibit in the net. Please wait a little while until the items reach you.
From the method, maybe it seems to be one in 1975's Flying V.
Though there is a trace of having been repaired but it was done gently, and so there is no problem to use it.
The nob • POT x 3 • the pick up cover x 2 • the rear pick up screw x 2 • the upper or lower spring of the front pick up have been changed to non originals.
The position of the rear end pin will be made alternations.
Rating
59
Translation / English
- Posted at 10 Jul 2015 at 20:13
I'm scheduled to ship your order the day after tomorrow.
I handle Gibson J-45s and Gibson ES-345s as well. If you're interested, I'll upload them. Please wait a little longer until your order reaches you.
Your order, as viewed from its specifications, is probably a Flying V probably manufactured in 1975. It has traces of a corrected head break but has been carefully been repaired. It's therefore problem-free in use. Its knob, 3 pots, 2 pickup covers, 2 rear pickup screws, and high and low springs for front pickup have been replaced with non-original spares. Its rear end pin has been shifted to a different position.
I handle Gibson J-45s and Gibson ES-345s as well. If you're interested, I'll upload them. Please wait a little longer until your order reaches you.
Your order, as viewed from its specifications, is probably a Flying V probably manufactured in 1975. It has traces of a corrected head break but has been carefully been repaired. It's therefore problem-free in use. Its knob, 3 pots, 2 pickup covers, 2 rear pickup screws, and high and low springs for front pickup have been replaced with non-original spares. Its rear end pin has been shifted to a different position.
Rating
43
Translation / English
- Posted at 10 Jul 2015 at 20:12
I plan to ship it the day after tomorrow
I also handling Gibson J-45, Gibson ES-345 so as long as you are interested I will up it.
Please wait a little more until the products arrive.
Probably from the specification it is the Flying V, which is made in 1975
There is head fold correcting marks but by having carefully repair there is no problem to be used.
Knob · POT × 3 · pickup cover × 2 · rear pickup screw × 2 · front pickup's high and low spring are non-original so I will exchanged it.
The rear end pin position has been changed.
I also handling Gibson J-45, Gibson ES-345 so as long as you are interested I will up it.
Please wait a little more until the products arrive.
Probably from the specification it is the Flying V, which is made in 1975
There is head fold correcting marks but by having carefully repair there is no problem to be used.
Knob · POT × 3 · pickup cover × 2 · rear pickup screw × 2 · front pickup's high and low spring are non-original so I will exchanged it.
The rear end pin position has been changed.
