打抜屑
打抜屑の除去
機械、部品、工具、書類等がひと目見れば何であるか、何に使うかが明確になっている。
入退場の申請方法
カードリーダーによる申請
カードリーダーに登録されたデータは毎時０分に勤務管理システムサーバーへ取り込まれます。
入場申請
退場申請
申請時間を確認
退場申請完了
タッチパネル画面が入場画面になっているか確認。
退場画面になっている場合は、入場ボタンをタッチすると入場画面に切り替わります。
省エネモードにより画面が消えている場合は、タッチパネル画面に触れると画面が立ち上がります。
Rating
52
Translation / English
- Posted at 20 Apr 2015 at 09:01
Punched waste
Removal of punched waste
It is clear from the first glance what the appliances, parts, tools, documents etc. are and what are they used for.
Application concerning entrance or exit to the premises
Application using card reader
The data registered in the card reader is read into the work management system server every hour at 0 minute point.
Entry application
Exit application
Verify the time of application
Exit application completed
Verify if the screen of the touch panel is set to premises entry screen
If it is set to premises exit screen, you have to press "entry" button and the screen will change to premises entry screen.
If the screen is turned off due to energy-saving mode, you need to touch the touch panel and the screen will reappear.
rmera likes this translation
Removal of punched waste
It is clear from the first glance what the appliances, parts, tools, documents etc. are and what are they used for.
Application concerning entrance or exit to the premises
Application using card reader
The data registered in the card reader is read into the work management system server every hour at 0 minute point.
Entry application
Exit application
Verify the time of application
Exit application completed
Verify if the screen of the touch panel is set to premises entry screen
If it is set to premises exit screen, you have to press "entry" button and the screen will change to premises entry screen.
If the screen is turned off due to energy-saving mode, you need to touch the touch panel and the screen will reappear.
Rating
52
Translation / English
- Posted at 20 Apr 2015 at 08:58
Punched scrap
Removal of punched scrap
If you can see equipment, spare parts, tools, documents clearly, you definitely understand what to use.
Entrance monitoring method:
Authorization via card reader
Data, which is recorded in card reader, goes to work management system server every time in O minutes
Entrance authorization
Leaving workplace authorization
Check time of authorization
End of leaving workplace authorization
Check if touch panel screen shows "Entrance display" view
If it shows "Leaving workplace" display, after pressing "Entrance" button, it will change to "Entrance display" view
If display will be switched off because of energy economy, after touching it, it starts to work
rmera likes this translation
Removal of punched scrap
If you can see equipment, spare parts, tools, documents clearly, you definitely understand what to use.
Entrance monitoring method:
Authorization via card reader
Data, which is recorded in card reader, goes to work management system server every time in O minutes
Entrance authorization
Leaving workplace authorization
Check time of authorization
End of leaving workplace authorization
Check if touch panel screen shows "Entrance display" view
If it shows "Leaving workplace" display, after pressing "Entrance" button, it will change to "Entrance display" view
If display will be switched off because of energy economy, after touching it, it starts to work
