Center poleの形状はCenter poleの内部を貫通させたあと、先端部に金具を溶接して製作していました。
しかし、エンドプレート部の形状を変更したため、既存のセンターポールの形状のように金具を溶接することができないので、センターポールを貫通させずに製作できる構造に変更しました。
Powderのグレードについては、そもそも開示をしておらず、打合せ等で言及していないと思います。
Aさんにも確認しました。
試験結果レポートは、PCを紛失したので、再度取り寄せております。
評価
50
翻訳 / 英語
- 2018/04/10 18:52:27に投稿されました
The form of center pole was made after going through inside the center pole and then made by welding a metal fitting on the tip.
However, as the end plate form was changed, I could not welded the metal like existing center pole, so I changed to a structure without going through the center pole.
As for powder grade, it is not disclosed and referred at such as a meeting.
I have checked it with Mr A too.
As I have lost PC, the exam result report is being sent again.
However, as the end plate form was changed, I could not welded the metal like existing center pole, so I changed to a structure without going through the center pole.
As for powder grade, it is not disclosed and referred at such as a meeting.
I have checked it with Mr A too.
As I have lost PC, the exam result report is being sent again.
評価
52
翻訳 / 英語
- 2018/04/10 19:00:00に投稿されました
The shape of Center pole used to be made with metal fittings welded to the edges after passing it through the centre of Center pole.
However, we have changed it to the structure where it’s being able to made without the metal fittings passing through Center pole since we changed the shape of the end plate parts and we no longer able to weld the fittings like we used to do with the old one.
I think as for the grade of Powder, it hasn’t even been disclosed so it has not been indicated in a meeting or such either. I confirmed this from Mr. A as well.
As for the exam result report, now I am waiting to recieve it once again as I lost my PC.
However, we have changed it to the structure where it’s being able to made without the metal fittings passing through Center pole since we changed the shape of the end plate parts and we no longer able to weld the fittings like we used to do with the old one.
I think as for the grade of Powder, it hasn’t even been disclosed so it has not been indicated in a meeting or such either. I confirmed this from Mr. A as well.
As for the exam result report, now I am waiting to recieve it once again as I lost my PC.
評価
52
翻訳 / 英語
- 2018/04/10 18:52:54に投稿されました
The shape of the Center pole is made in such a way that the front of the metal fitting is welded after the interior is made hollow. However, in order to change the shape of the end plate portion, the metal fitting cannot be welded like the shape of the existing centre pole. As such, there is a change to the structure by making the centre pole unable to be penetrated.
With regard to the grade of the powder, as it is not disclosed in the first place, I think this is why we do not talk about this during meetings.
As the PC had been lost, please arrange for the back order of the test results report.
With regard to the grade of the powder, as it is not disclosed in the first place, I think this is why we do not talk about this during meetings.
As the PC had been lost, please arrange for the back order of the test results report.
