Notice of Conyac Termination
conyac
  1. Conyac »
  2. Finished for Public »
  3. Translation from Japanese to English »
  4. Check the pulling scratch at swaging...

Translation Results Requested Through Conyac Made Public

[Translation from Japanese to English ] Check the pulling scratch at swaging part/ slanting edge at the beginning an...

Original Texts
スエージング部引きキズ・端面斜めを始め、終り１本／ロットに確認

加工品番、スエージング寸法の読み間違いに注意する。
加工品番を間違いなく掲示する

切断寸法不良の発生
切断未加工の発生
切断方向逆の発生
切断端面ナナメの発生
切断寸法不良の発生
指・手が切断される
切断寸法不良の流出
切断端面ナナメの流出
切断未加工の流出

カッターは回転させない
カッター刃に直角に当たる様に治具をセットする

カッター溝上に指･手を置かない
寸法をスケールにて測定後木型の基準線でＷチェック

基準線罫引き
パイプセット治具
試し切断
yoppo1026
Translated by yoppo1026
Check the pulling scratch at swaging part/ slanting edge at the beginning and end, each time 1pc/lot

Be careful of misreading the processing part number and swaging dimension.
The processing part number shall be put without fail.

Occurrence of cutting dimension failure
Occurrence of unprocessed cutting
Occurrence of wrong cutting direction
Occurrence of slanting cutting edge
Occurrenec of cutting dimension failure
Cutting finger or hand
Escape of cutting dimension failure
Escape of slanting cutting edge
Escape of unprocessed cutting

Do not rotate the cutter
Set the jig so that it hit the cutter blade at a right angle

Do not put your fingers and hands on the cutter groove
After measuring the dimension with a scale, double check with the reference line of the wood pattern

Reference line ruling
Pipe set jig
Trial cutting
Contact

Result of Translation in Conyac

Number of Characters of Requests:
240letters
Translation Language
Japanese → English
Translation Fee
$21.6
Translation Time
about 3 hours
Freelancer
yoppo1026 yoppo1026
Standard
プロフィールをご覧いただき、誠にありがとうございます。
日本語ネイティブで、イギリスで10年ほど暮らした経験があるので、英語もほぼネイティブレベルです。...
Contact

Other Translations From Japanese To English Are Made Public

I am sorry to put you several questions. When posting clips to the YouTube, several kinds of thumbnails are created, could you tell me how to squeeze it's size? Ex, to make thumbnail for less than 450px. At the present, it also creates larger than 1000px so that the capacity will be exceeded for it's safe operation. Otherwise, I don't care the way without making any of thumbnails. With reg...
Japanese → English
Good afternoon. How have you been? I am glad that you are coming to Japan again. Let’s certainly climb mountains together. I climbed Mount Fuji 30 times this summer. Let’s climb it in that day next year! Because it’s next year, my schedule is still empty for that day. I will recommend the Yoshida route, but the Subashiri route is also recommendable. Both routes are fine. As for the moun...
Japanese → English
I have a request. I would like you to add pagination to the widgets page under the admin page. As the number of installed widgets increase, it takes longer to load the page. It is quite an inconvenience. I appreciate it if you can help look into it. I have a request. I would like you to make it such that the starting frame of the video can be set, when embedding YouTube videos. To be speci...
Japanese → English
I am "名前" of Account 123. I am emailing to you regarding the shipping with "男性担当者名" but I have not received arrangements. Is he alright? I emailed him the previous day but there was no reply. Please let me know the status over there. If arrangements are not made right away I will be in extreme trouble. I can't wait any longer. I would like to have it handed over by the delivery person by tomo...
Japanese → English

yoppo1026's Public Translations

I’d like to purchase 〇〇〇 (数量) XXXs.
Is it possible?
Japanese → English
I watched a video of the state of the phonograph record.
It looks very clean and it seems to have no problem, so please send me a bill including postage.
Thank you very much for your kind explanation.
Japanese → English
I thought about a method to finish smoothly, so please check the attached movie.

Step 1: Dampen the same powder as the body and stretch it like a bar.
Step 2: Cut it to about 4 mm each with a cutter.
Step 3: Add the cut material to the step of the body.
Step 4: Later, roll it with hand applied with dry powder.

If you finish using all the same materials, the appearance will be very smooth.
Once you get used, it will finish one piece in less than 10 seconds.

Would you please try in this way?
Please consider whether mass production is possible in reality.
Japanese → English
As we are during summer holiday this week in Japan, we are sorry for not contacting you soon.
As A contains the contents that we have to confirm to the supplier, please let us know the scheduled publication date of PO.
If we don't have PO, we cannot request to the supplier, so please check.

As mentioned above, since we are during summer holiday, it is difficult for us to answer on August 17.
Regarding the submission period, please let us know the scheduled publication date of PO, and we can request the factory to create A.
We will contact you later.
Japanese → English

yoppo1026's Services

正確にスピーディーに翻訳いたします。（英訳、和訳）
$8.00 per hour
Translation & Localization / Translation