「イヤホンスピーカーセットの改善要望」
イヤホンスピーカーセットについて、改善してほしい部分がいくつかあります。
・マイクをヘルメットに取り付ける部分の接着剤がベタベタする。接着力が弱くマジックテープを剥がそうとすると接着剤の方が剥がれてしまう。
・マイクの先端部分の部品がぐらついている物が多く、ノイズ発生の原因になっている。
・スピーカーが厚すぎるため、ヘルメットをかぶるとスピーカーが耳に当たって痛い。もっと薄くしてほしいです。
これらを改善すればもっと売れるようになると思います。
Rating
55
Translation / English
- Posted at 19 Jul 2013 at 17:06
"Earphone Speaker Set Improvement Request"
There are a few points we would like to see improved on the earphone speaker set.
・The adhesive for attaching the mic to the helmet is sticky. The adhesive is weak and it peels of more than magic tape.
・There are many parts on the edge of the mic that are loose, and this is causing a noise.
・The speakers are too thick, so they hurt ones ears when wearing the helmet. I would like them to be thinner.
I think if you could improve these points, they would sell better.
There are a few points we would like to see improved on the earphone speaker set.
・The adhesive for attaching the mic to the helmet is sticky. The adhesive is weak and it peels of more than magic tape.
・There are many parts on the edge of the mic that are loose, and this is causing a noise.
・The speakers are too thick, so they hurt ones ears when wearing the helmet. I would like them to be thinner.
I think if you could improve these points, they would sell better.
Rating
52
Translation / English
- Posted at 19 Jul 2013 at 16:48
"Requests for improvement of earphone speaker set"
For earphone speaker set, there are several parts which could be improved.
· Adhesives of the part that microphone attaches to the helmet is sticky. Adhesive would peel off when trying to peel off the Velcro.
· The parts of the tip of the microphone are shaky, which causes the noise.
· Speaker is too thick. It hurts when wear a helmet because the speaker would hit the ear. It should be thinner.
I think that it is might sell better after improving these.
For earphone speaker set, there are several parts which could be improved.
· Adhesives of the part that microphone attaches to the helmet is sticky. Adhesive would peel off when trying to peel off the Velcro.
· The parts of the tip of the microphone are shaky, which causes the noise.
· Speaker is too thick. It hurts when wear a helmet because the speaker would hit the ear. It should be thinner.
I think that it is might sell better after improving these.
Rating
42
Translation / English
- Posted at 19 Jul 2013 at 17:25
"Requests for improvement of earphone speaker set"
I have number of parts that wanted to be improved for the earphone speaker set.
The adhesives that attached microphone to the helmet is sticky. The adhesive force is weak and instead trying to peel off the magic tape, the adhesive itself peeled off.
The parts of the microphone tip is shaky in many cases and causing noise.
The speaker is too thick and it hurts my ear when I wear my helmet. Please make it thinner.
Your sell will increase if you do above improvement.
I have number of parts that wanted to be improved for the earphone speaker set.
The adhesives that attached microphone to the helmet is sticky. The adhesive force is weak and instead trying to peel off the magic tape, the adhesive itself peeled off.
The parts of the microphone tip is shaky in many cases and causing noise.
The speaker is too thick and it hurts my ear when I wear my helmet. Please make it thinner.
Your sell will increase if you do above improvement.
"peels of more than magic tape" -> "peels off with the Velcro"