接続できませんでした
私の車のフロント側とトランク側の写真を送ります
フロント側は１つだけマッチするコネクタ（電源系）があったので接続してみました。
電圧も12Vあるのですが、電源がONできませんでした。
トランク側は形状があうコネクタがありませんでした
ちなみに、
DVD本体は12Vのプラスとマイナスの2本の線だけ接続すればPOWER ONできますか？
ACCもつなげる必要がありますか？
私はDVD本体が壊れていないか、コネクタを接続する前に確認したい。
Rating
52
Translation / English
- Posted at 03 Mar 2012 at 12:27
I could not connect.
Attached are the photos of the front side and trunk side of my car.
I connected it to the front side as there was only one available connector (power supply) at the front side.
The voltage was 12V, but it did not turn on.
At the trunk side, there was no connector.
I have some questions:
Can the DVD main body be turned on only by connecting the two wires of + and - (both 12V)?
Is it necessary to connect ACC, too?
I would like to check if the DVD main body is not defective before connecting.
jajack likes this translation
Attached are the photos of the front side and trunk side of my car.
I connected it to the front side as there was only one available connector (power supply) at the front side.
The voltage was 12V, but it did not turn on.
At the trunk side, there was no connector.
I have some questions:
Can the DVD main body be turned on only by connecting the two wires of + and - (both 12V)?
Is it necessary to connect ACC, too?
I would like to check if the DVD main body is not defective before connecting.
Rating
52
Translation / English
- Posted at 03 Mar 2012 at 12:25
I could not connect it.
I will send you some photos showing the front side of my car and the trunk side.
I found one connector (for power system) at the front side which was the only one connector to fit and I connected to that connector. I confirmed 12V but the power did not turn on.
At the trunk side, there was no connector to fit.
Will you let me know if DVD player turns on only by connecting the two cables, positive and negative, to the 12V power source? Do I have to connect AC line, too?
Before I connect the DVD player, I want to make sure if it works or not.
I will send you some photos showing the front side of my car and the trunk side.
I found one connector (for power system) at the front side which was the only one connector to fit and I connected to that connector. I confirmed 12V but the power did not turn on.
At the trunk side, there was no connector to fit.
Will you let me know if DVD player turns on only by connecting the two cables, positive and negative, to the 12V power source? Do I have to connect AC line, too?
Before I connect the DVD player, I want to make sure if it works or not.
細かいご配慮、ありがとうございます！助かりました！！