下記の操作で、Inputを変更してみて下さい
(1)SHIFTキーを押しながらパッド6(UTILITY)を押し、“Utilty Rec”に する
(2)ENTERキーを押す
(3)◀︎▶︎のボタンで“Input”を表示
(4)-1、+1キーで“Mic”または“Line”を選ぶ。
(5)EXITを2回押すとプレイモードに戻る。
• MIC INPUTに接続して使用できるマイクは ダイナミックマイクか、電池内臓のコンデンサーマイクです
これで録音できませんか？
Rating
55
Native
Translation / English
- Posted at 21 Apr 2017 at 01:10
Try changing the input using the below operation.
(1) Switch to "Utility Rec" by pressing the Shift key with Keypad 6 (Utility).
(2) Press Enter key.
(3) Display "Input" using ◀︎▶︎ buttons.
(4) Choose "Mic" or "Line" with -1, +1 keys.
(5) Press EXIT twice and return to play mode.
• The mics that can be connected to mic input and can be used are either dynamic mics or condenser mics with internal batteries.
Can't you record sound by doing these?
atori-entertainment likes this translation
(1) Switch to "Utility Rec" by pressing the Shift key with Keypad 6 (Utility).
(2) Press Enter key.
(3) Display "Input" using ◀︎▶︎ buttons.
(4) Choose "Mic" or "Line" with -1, +1 keys.
(5) Press EXIT twice and return to play mode.
• The mics that can be connected to mic input and can be used are either dynamic mics or condenser mics with internal batteries.
Can't you record sound by doing these?
Rating
52
Translation / English
- Posted at 21 Apr 2017 at 01:16
Please alter the way of INPUT, using the following steps.
1) While holding down SHIFT key, push a pad 6 (UTILITY), which would turn on UTILITY REC.
2) Click ENTER key.
3) Using left/right arrows, go to INPUT.
4) With -1 or +1 key, chose MIC or LINE.
5) Double clicks on EXIT key will take it to PLAY mode.
* Microphones that can be used with MIC INPUT are a dynamic microphone or a capacitor microphone with built-in battery.
Hope this will work for your recording.
1) While holding down SHIFT key, push a pad 6 (UTILITY), which would turn on UTILITY REC.
2) Click ENTER key.
3) Using left/right arrows, go to INPUT.
4) With -1 or +1 key, chose MIC or LINE.
5) Double clicks on EXIT key will take it to PLAY mode.
* Microphones that can be used with MIC INPUT are a dynamic microphone or a capacitor microphone with built-in battery.
Hope this will work for your recording.
Rating
50
Translation / English
- Posted at 21 Apr 2017 at 01:18
Please change the input as indicated below.
(1) Press pad 6 while still pressing the Shift key, change to "Utility Rec".
(2) press enter key
(3) choose "input" by ◀︎▶︎
(4) choose"Mic"or"Line" by +1or-1key.
(5)Exit-double click put back to playing mode.
•Dynamic mike or condenser mike has built-in battery are available for using MIC INPUT.
(1) Press pad 6 while still pressing the Shift key, change to "Utility Rec".
(2) press enter key
(3) choose "input" by ◀︎▶︎
(4) choose"Mic"or"Line" by +1or-1key.
(5)Exit-double click put back to playing mode.
•Dynamic mike or condenser mike has built-in battery are available for using MIC INPUT.
Rating
47
Translation / English
- Posted at 21 Apr 2017 at 01:17
Please try to change the input of the below operations
(1) While pressing SHIFT key, pressing the pad 6 (utility), will do a "Utilty Rec"
(2) Press the ENTER key
(3)By pressing the ◀︎▶︎buttons the "input" is shown.
(4) By pressing the -1,+1 keys, the "Mic" or "Line" is selected.
(5)By pressing EXIT two times you return to the "play mode".
*The mic that can be used by connecting it to the MIC INPUT can be a dynamic mic or a mic with a capacitor of internal batteries.
With all this is it possible for you to record?
(1) While pressing SHIFT key, pressing the pad 6 (utility), will do a "Utilty Rec"
(2) Press the ENTER key
(3)By pressing the ◀︎▶︎buttons the "input" is shown.
(4) By pressing the -1,+1 keys, the "Mic" or "Line" is selected.
(5)By pressing EXIT two times you return to the "play mode".
*The mic that can be used by connecting it to the MIC INPUT can be a dynamic mic or a mic with a capacitor of internal batteries.
With all this is it possible for you to record?
