インフィニティ商品の280019 STORAGE STOOLにて気になる点がありますので、
添付資料ご確認お願い致します。
その旨インフィニティ社にお伝え頂き、改善の方お願い致します。
裏面画像
座面に270007 FA IRON HIGH STOOLと同じ仕様の穴を空けてください。
塗装仕上げ：ナチュラルブラック
赤丸内のキャスター部分ですが平行な場所に置いても一部が地面に接地せず、ぐらついしてしまう物があります。製作時、検品時にキャスターが浮いてしまうものが無いか確認お願い致します。
Rating
44
Translation / English
- Posted at 09 Mar 2017 at 15:14
Since I have some concerns on the item of Infiniti, 280019 STORAGE STOOL, please confirm the attached document.
Please let Infiniti know about it, and ask them to improve the product.
The picture image on the back.
Please make the hole with the same specification as the one in 270007 FA IRON HIGH STOOL on the seat surface.
Paint finish : Natural Black
Regarding the caster part in the read circle, some items does not touch on the ground evenly, so the main unit wobbles. Please make sure to confirm all the casters securely touch the ground in producing and in inspecting the products.
Please let Infiniti know about it, and ask them to improve the product.
The picture image on the back.
Please make the hole with the same specification as the one in 270007 FA IRON HIGH STOOL on the seat surface.
Paint finish : Natural Black
Regarding the caster part in the read circle, some items does not touch on the ground evenly, so the main unit wobbles. Please make sure to confirm all the casters securely touch the ground in producing and in inspecting the products.
Rating
52
Translation / English
- Posted at 09 Mar 2017 at 15:17
Since there are some points what we are concerning about in 280019 STORAGE STOOL of Infinity Items,
please confirm attached document.
Please forward this to Infinity, and ask for improvement.
Back side image
Please make a same hole as specification as 270007 FA IRON HIGH STOOL on the seat.
Paint Finish: Natural Black
This is for the caster part in the red circle, but there are casters that will not touch the ground and being shaky even if they are placed in parallel places. Please check whether there is any that the casters will float during production, and inspection.
please confirm attached document.
Please forward this to Infinity, and ask for improvement.
Back side image
Please make a same hole as specification as 270007 FA IRON HIGH STOOL on the seat.
Paint Finish: Natural Black
This is for the caster part in the red circle, but there are casters that will not touch the ground and being shaky even if they are placed in parallel places. Please check whether there is any that the casters will float during production, and inspection.
Rating
50
Translation / English
- Posted at 09 Mar 2017 at 15:18
I am concerned about a point regarding 280019 storage stool of item of Infinity.
Would you check the attached document?
Please tell it to Infinity and ask them to improve it.
Picture at back
Please make a hole of specification that is the same as 2700007 FA IRON HIGH STOOL at the seat.
Finishing coating: Natural black
As for caster in the red circle, some are not stable and part of it is not fixed on the ground even if I put it on the flat place.
Would you check if there is the one where the caster is not stable when you manufacture and inspect it?
Would you check the attached document?
Please tell it to Infinity and ask them to improve it.
Picture at back
Please make a hole of specification that is the same as 2700007 FA IRON HIGH STOOL at the seat.
Finishing coating: Natural black
As for caster in the red circle, some are not stable and part of it is not fixed on the ground even if I put it on the flat place.
Would you check if there is the one where the caster is not stable when you manufacture and inspect it?
