パーツの不具合に関してですがAは特に製品毎に個体差があり手のパーツが抜けない等の意見が多いです
対処法としてはお湯につけたりドライヤーで温める等してパーツを柔らかくして動きをつけやすくするようです
この際温め過ぎてフィギュア本体を破損したり（特に細い部分が解けてしまったり塗装が剥げたりします）、また手のやけどには十分注意し自己責任においてやって下さい
これらのオーダーは段ボールに商品が入っていなかった言っています
もしこれが本当であれば梱包に問題があります
これは返金してもらえますか？
評価
44
翻訳 / 英語
- 2016/09/02 13:52:44に投稿されました
Regarding the defective parts, various individual difference is especially seen in A. So we often receive a lot of complaints such that the parts of the hand won't come off easily.
As a countermeasure, it works pretty much to warm A by putting it into hot water, or by blowing with a dryer in order to soften the parts to make it easily come off. In doing this., please pay extra attention not to damage the figure itself by too much heat (especially thin parts could be melted or the paint would be peeling off) or not to burn your hand. Please take full responsibility for your actions.
The customer told me that these orders were not packed in the cardboard box.
If this is true, then the packaging is problematic.
Can you please issue a full refund for this?
As a countermeasure, it works pretty much to warm A by putting it into hot water, or by blowing with a dryer in order to soften the parts to make it easily come off. In doing this., please pay extra attention not to damage the figure itself by too much heat (especially thin parts could be melted or the paint would be peeling off) or not to burn your hand. Please take full responsibility for your actions.
The customer told me that these orders were not packed in the cardboard box.
If this is true, then the packaging is problematic.
Can you please issue a full refund for this?
評価
52
翻訳 / 英語
- 2016/09/02 13:56:47に投稿されました
As for the defected parts, A especially gets opinions such as the handle parts cannot be pulled out as each item has individual differences.
To cope with this, it seems that they make it easy to move by softening the parts by soaking it in hot water, or warming it with a hair dryer.
The figure may get defected from too much heat (especially fine parts may get melted, or the paints may peel off), so please do this carefully as it is your responsibility.
They say that the items were not in the cardboard in these orders.
If this is true, the packaging has a problem.
Could you make a refund on this item?
To cope with this, it seems that they make it easy to move by softening the parts by soaking it in hot water, or warming it with a hair dryer.
The figure may get defected from too much heat (especially fine parts may get melted, or the paints may peel off), so please do this carefully as it is your responsibility.
They say that the items were not in the cardboard in these orders.
If this is true, the packaging has a problem.
Could you make a refund on this item?
評価
52
翻訳 / 英語
- 2016/09/02 14:01:55に投稿されました
About the defects on the parts, A especially has the individual differences for each product and we are receiving many comments saying that the parts for the hands are difficult to pull out.
What can be done to cope with this would be sinking them in hot water or giving hot air by dryers so that parts will be soften and more movable.
But you need to be careful not to damage the figure itself (especially not to let small parts melted or any paint wore out). You need to be careful not have burns so please do this under your responsibility.
I heard that this order was not installed in a cardboard box.
If that is true then there was problem in its packing.
Please refund for them.
What can be done to cope with this would be sinking them in hot water or giving hot air by dryers so that parts will be soften and more movable.
But you need to be careful not to damage the figure itself (especially not to let small parts melted or any paint wore out). You need to be careful not have burns so please do this under your responsibility.
I heard that this order was not installed in a cardboard box.
If that is true then there was problem in its packing.
Please refund for them.
