ワークをシュートに投入時に端面を揃える
ストッパー調整時に、ネジの締め忘れの無いこと
加工油ノズル位置のズレに注意する
加工パンチのカス付着、摩耗によりキズが付く恐れがあり、定期的にパンチ磨きが必要（１回/Ｗ実施）
材料寸法不良により後工程で、寸法、形状不良となる
異材混入、スエージング寸法間違いが発生する
ネジを締め忘れるとスエージング寸法不良が発生する
コイル材が万一落下したときに衝撃が大きくなり大怪我に繋がる。
移動中のコイル材が人にあたり怪我させてしまう。
評価
52
翻訳 / 英語
- 2015/05/22 09:28:01に投稿されました
Align the end face at the moment of putting works to the chute.
Be careful not to forget to tightening the screws at the moment of adjusting the stopper.
Be careful of the deviation of the nozzle position of machining oil.
The adhesion of chaff of the processing punch or abrasion may cause scratches. Punch polish is required on a regular basis (once/W)
Material and dimensions failure may cause the failure of size and shape later.
Contamination and swaging size mistake occur.
Screw tightening omission causes swaging size failure.
The drop of coil stocks may increase the impact and cause serious injuries.
Coil stocks in displacement may hit people and cause injuries.
ojamaomoruさんはこの翻訳を気に入りました
Be careful not to forget to tightening the screws at the moment of adjusting the stopper.
Be careful of the deviation of the nozzle position of machining oil.
The adhesion of chaff of the processing punch or abrasion may cause scratches. Punch polish is required on a regular basis (once/W)
Material and dimensions failure may cause the failure of size and shape later.
Contamination and swaging size mistake occur.
Screw tightening omission causes swaging size failure.
The drop of coil stocks may increase the impact and cause serious injuries.
Coil stocks in displacement may hit people and cause injuries.
評価
57
翻訳 / 英語
- 2015/05/22 09:18:47に投稿されました
When inputting the work into the chute, align the edge.
Do not forget to drive screws at the adjustment of the stopper.
Be careful of the misalignment of processing oil nozzle.
The product might get scratched due to a scrap of processing punch and wearing. Therefore the punch need to be polished regularly (Once a week).
Due to material dimension defect, it may be defective in its measure and shape in the after process.
Other material mixing and the swaging dimension failure may occur.
If you foget to drive a screw, swaging dimensions failure may occur.
If the coil material should drop, the impact may be big, which will lead to a serious injury.
The coil material in the move may hit a person to be injured.
ojamaomoruさんはこの翻訳を気に入りました
Do not forget to drive screws at the adjustment of the stopper.
Be careful of the misalignment of processing oil nozzle.
The product might get scratched due to a scrap of processing punch and wearing. Therefore the punch need to be polished regularly (Once a week).
Due to material dimension defect, it may be defective in its measure and shape in the after process.
Other material mixing and the swaging dimension failure may occur.
If you foget to drive a screw, swaging dimensions failure may occur.
If the coil material should drop, the impact may be big, which will lead to a serious injury.
The coil material in the move may hit a person to be injured.
助かりました。
ありがとうございます。