残業・休出時間は１５分単位、深夜は１０分単位で入力して下さい。
（上記の単位で入力されない場合は、エラー表示されますので再入力して下さい）
入力部分（カーソル点滅部分）
残業時間は各自にて申告して頂きます（厳守）
残業をしなかった場合入力は不要ですので、そのまま⑤へ
１時間３０分残業をした場合
「０１３０」とタッチすると画面に次のように表示される。
業務外除く
残業・休出＝０１：３０ 深夜＝０：００
タッチパネルが下図画面に切り替わったのを確認。
二重打刻をした場合は、最初の申請が有効になります
評価
52
翻訳 / 英語
- 2015/04/20 13:59:56に投稿されました
Please enter overtime work and rest by 15 minutes, 10 minutes for late night.
(if entered other than the above unit, error will appear so please re-enter.)
Entry part (cursor blinking)
Please report overtime worked individually (required)
You don't need to enter anything if there is no overtime work, proceed to (5).
If you overworked 1 hour and 30 minutes, when you touch "0130" following screen appears.
Excluding working hour
Overtime/rest =01:30 Late night =0:00
Please confirm the touch panel changed to the following diagram.
If you enter twice, first entry will be effective.
ka-----ne--------kaさんはこの翻訳を気に入りました
(if entered other than the above unit, error will appear so please re-enter.)
Entry part (cursor blinking)
Please report overtime worked individually (required)
You don't need to enter anything if there is no overtime work, proceed to (5).
If you overworked 1 hour and 30 minutes, when you touch "0130" following screen appears.
Excluding working hour
Overtime/rest =01:30 Late night =0:00
Please confirm the touch panel changed to the following diagram.
If you enter twice, first entry will be effective.
評価
52
翻訳 / 英語
- 2015/04/20 14:10:00に投稿されました
Input overtime work and holiday work counting by 15 minutes, and midnight work counting by 10 minutes.
(If you do not input the time with above units, an error appears. Please input it again.)
Input part (a part of blinking cursor)
Overtime work should be reported by each one (fidelity)
If you do not work overtime, inputting is necessary. Go to the step 5.
If you work over time 1h30min, touch "0130". Then display will be shown as follows.
Excluding off the job
Overtime work/holiday work = 01:30 Midnight work = 0:00
Confirm the touch panel is changed to the following screen.
If you double-input, the first application will be valid.
ka-----ne--------kaさんはこの翻訳を気に入りました
(If you do not input the time with above units, an error appears. Please input it again.)
Input part (a part of blinking cursor)
Overtime work should be reported by each one (fidelity)
If you do not work overtime, inputting is necessary. Go to the step 5.
If you work over time 1h30min, touch "0130". Then display will be shown as follows.
Excluding off the job
Overtime work/holiday work = 01:30 Midnight work = 0:00
Confirm the touch panel is changed to the following screen.
If you double-input, the first application will be valid.
評価
50
翻訳 / 英語
- 2015/04/20 14:54:30に投稿されました
Please enter your overtime hours and holiday work hours by 15 minutes as one unit and late night hours by 10 minutes as one unit on your time card.
(If you do not enter by these units, the screen will display an error message. You will need to re-enter.)
input unit (where the cursor is blinking)
You need to claim for overtime hours by yourself (strictly).
If you did not do any overtime, you do not need to enter anything here. Just proceed to ⑤
If you have 1 hour and 30 minutes overtime hours,
If you enter "0130", the followings will appear on the screen.
Overtime work, holiday work = 01:30 Late night work = 0:00
Please confirm a touch screen switching to below.
If you entered it twice, your first entry will be will be valid.
(If you do not enter by these units, the screen will display an error message. You will need to re-enter.)
input unit (where the cursor is blinking)
You need to claim for overtime hours by yourself (strictly).
If you did not do any overtime, you do not need to enter anything here. Just proceed to ⑤
If you have 1 hour and 30 minutes overtime hours,
If you enter "0130", the followings will appear on the screen.
Overtime work, holiday work = 01:30 Late night work = 0:00
Please confirm a touch screen switching to below.
If you entered it twice, your first entry will be will be valid.
