吊り具挿入
コイル材の取り付け
吊り具をスプールの上部の穴に挿入する。
コイル材を吊り上げる。
コイル材をコイル材スタンドまで移動する。
スプール中央の穴をコイル材スタンド軸に合わせ、コイル材をセットする。
スプール固定金具を取り付ける。
ストッパーを取り付ける。
ストッパーのボルトを締め付ける。
吊り具をスプールから抜く。
ホイストクレーンの格納
所定の場所に移動する。
吊り具をフックへ戻す。
周囲に人がいないことを確認してから作業すること。
ストッパーは固定金具を外す直前まで取り付けたままにすること
![[削除済みユーザ]](https://secure.gravatar.com/avatar/695023b4efd563721d13716b1457bc73.png?d=identicon&mode=crop&r=PG&s=42)
評価
52
翻訳 / 英語
- 2015/05/21 16:38:21に投稿されました
Insert a hoisting accessory
Install a coil stock
Insert a hoisting accessory into a hole of upper part of a spool.
Pull up a coil stock.
Move a coil stock to a coil stock stand.
Set a coil stock by adjusting a hole of a center spool to a stand axis of a coil stock.
Install a fixing fitting of a spool.
Insert a stopper.
Tighten a bolt of a stopper.
Pull out a hoisting accessory from a spool.
Housing a hoist crane
Move to a specified place.
Return a hoisting accessory to a hook.
Work this after making sure that there is no one around.
Leave a stopper instal until just before a fixing fitting is removed.
Install a coil stock
Insert a hoisting accessory into a hole of upper part of a spool.
Pull up a coil stock.
Move a coil stock to a coil stock stand.
Set a coil stock by adjusting a hole of a center spool to a stand axis of a coil stock.
Install a fixing fitting of a spool.
Insert a stopper.
Tighten a bolt of a stopper.
Pull out a hoisting accessory from a spool.
Housing a hoist crane
Move to a specified place.
Return a hoisting accessory to a hook.
Work this after making sure that there is no one around.
Leave a stopper instal until just before a fixing fitting is removed.
評価
50
翻訳 / 英語
- 2015/05/21 15:38:46に投稿されました
Inserting lifter
Installation of a rolled coil
Insert a lifter into a hole located upward on the spool
Lift a rolled coil
Move a rolled coil to a rolled coil stand
Fit the center hole of spool to the axes of the rolled coil stand, and set the rolled coil
Attach spool fixed metal fitting
Attach stopper
Tighten stopper bolt
Remove lifter off spool
Storage of cranes with hoist
Move cranes to the designated location
Return lifter to hook
Make sure there is no people around before you operate
Stopper should be kept attached until removal of fixed metal fitting
akaakaaさんはこの翻訳を気に入りました
Installation of a rolled coil
Insert a lifter into a hole located upward on the spool
Lift a rolled coil
Move a rolled coil to a rolled coil stand
Fit the center hole of spool to the axes of the rolled coil stand, and set the rolled coil
Attach spool fixed metal fitting
Attach stopper
Tighten stopper bolt
Remove lifter off spool
Storage of cranes with hoist
Move cranes to the designated location
Return lifter to hook
Make sure there is no people around before you operate
Stopper should be kept attached until removal of fixed metal fitting
評価
44
翻訳 / 英語
- 2015/05/21 15:47:04に投稿されました
Clamp insertion
Installation of coil material
A clamp is inserted in a hole in the upper part of a spool.
Coil material is suspended.
The coil material is moved to coil material stand.
A hole at the center of a spool is added to a coil material stand axis and coil material is set.
A spool fixing clasp is installed.
A stopper is installed.
The bolt is stopper is tightened up.
The clamp is removed from a spool.
Storage of hoist crane
Move to prescribed location.
The clamp is returned to a hook.
While working confirm that there are no people around.
Stopper is to remain attached as it is, until before removing the fixed clasp.
Installation of coil material
A clamp is inserted in a hole in the upper part of a spool.
Coil material is suspended.
The coil material is moved to coil material stand.
A hole at the center of a spool is added to a coil material stand axis and coil material is set.
A spool fixing clasp is installed.
A stopper is installed.
The bolt is stopper is tightened up.
The clamp is removed from a spool.
Storage of hoist crane
Move to prescribed location.
The clamp is returned to a hook.
While working confirm that there are no people around.
Stopper is to remain attached as it is, until before removing the fixed clasp.
