このカメラのミラーアップ機能については、このカメラは外観が大きいのでその分
ミラーも大きめです。
なのでシャッターを切る際にミラーが動く衝撃でカメラがブレてしまわないように
ミラーだけを先に上げておく事が出来る機能です。
使い方はフィルムを巻いて写真の構図を決めたら、レンズの付け根の右側にあるボタンを
手前にスライドさせるとミラーだけが上がります。
後はゆっくりとシャッターボタンを押せばシャッターが切れて写真が撮れます。
この時は出来れば三脚を使う事をお勧めします。
ご説明は以上です。
翻訳 / 英語
- 2013/09/23 09:26:47に投稿されました
Regarding the mirror-up feature of this camera, since it has a large exterior, the mirror is a little bit big as well.
The mirror moves and the camera blurs from the movement. To prevent this, when you cut the shutter, you will be able to elevate the mirror alone.
To use it, when you have rolled the film and have already decided the photo's composition, slide the button located at the right side of the base of the lens. Doing this will elevate the mirror alone.
After that, properly press the shutter button, so that the shutter cuts and you would be able to take a photo.
In this occasion, I would like to recommend the use of a tripod.
That will be all.
The mirror moves and the camera blurs from the movement. To prevent this, when you cut the shutter, you will be able to elevate the mirror alone.
To use it, when you have rolled the film and have already decided the photo's composition, slide the button located at the right side of the base of the lens. Doing this will elevate the mirror alone.
After that, properly press the shutter button, so that the shutter cuts and you would be able to take a photo.
In this occasion, I would like to recommend the use of a tripod.
That will be all.
翻訳 / 英語
- 2013/09/23 09:46:06に投稿されました
For the upgraded mirror feature of this camera, the mirror appears bigger since the camera has a big exterior
This is to avoid camera vibration when the shutter closes by initially opening only the mirror.
Once you have wound the film and decide on the picture setup, slide the button to the right of the lens base to bring up the mirror.
Then by slowly pressing the shutter button the shutter will close and the pictures are taken.
It is recommended that you use a tripod.
Nothing follows the above explanation.
This is to avoid camera vibration when the shutter closes by initially opening only the mirror.
Once you have wound the film and decide on the picture setup, slide the button to the right of the lens base to bring up the mirror.
Then by slowly pressing the shutter button the shutter will close and the pictures are taken.
It is recommended that you use a tripod.
Nothing follows the above explanation.
評価
52
翻訳 / 英語
- 2013/09/23 09:38:33に投稿されました
For the mirror lock-up function of this camera, the mirror is slightly bigger than others since the size of this camera is also bigger, therefore, the function is provided to lock the mirror prior to pressing the shutter for avoiding blurred pictures due to an impact resulting from a motion of mirror when releasing the shutter.
To use this function, after winding a film and a composition of picture is determined, Slide the button located at the base of lens towards near side so that only mirror is brought up.
After then, press the shutter button slowly so that the shutter is released and a picture can be taken.
It is recommended to use a tripod as much as possible when taking pictures using the mirror lock-up function.
This is the end of description.
hiroaki99さんはこの翻訳を気に入りました
To use this function, after winding a film and a composition of picture is determined, Slide the button located at the base of lens towards near side so that only mirror is brought up.
After then, press the shutter button slowly so that the shutter is released and a picture can be taken.
It is recommended to use a tripod as much as possible when taking pictures using the mirror lock-up function.
This is the end of description.