● 本体を水平に戻し、再度水を捨てる動作を
2 ～ 3回繰り返し、水を捨てる
６、手順2～ 5の動作（ 内）を2回程度繰り返す
７、給水タンクの水を捨て、本体や給水タンクに
付着した水滴をタオルなどでふき取る
給水栓パッキンがはずれてしまったら
給水栓の真ん中部分を押し上げる
● 人差し指で給水栓の真ん中部分を押す
給水栓パッキンの凸部を探す
● 給水栓パッキンを反らしながら、ふちを軽く下に押す
給水栓パッキンの
凸部と給水栓の凹部をあわせる
● 給水栓パッキンを浮かせたまま手で回す
評価
68
ネイティブ
翻訳 / 英語
- 2013/08/29 23:09:41に投稿されました
To make the water of the main body horizontally level, repeat the step of throwing out the water 2-3 times.
6. Repeat steps 2-5 in sequence twice.
7. After throwing out the water in the tank, wipe off any water drops on the main body and water tank with a towel.
If the seal of the faucet comes loose
Push up the middle part of the faucet
● Push the middle part of the faucet with your index finger
Search for any notches in the seal
● While bending the seal, push down lightly around the edges
Match the notches in the seal to the slots in the faucet
● Turn the faucet with your hand with the seal left loose as is
6. Repeat steps 2-5 in sequence twice.
7. After throwing out the water in the tank, wipe off any water drops on the main body and water tank with a towel.
If the seal of the faucet comes loose
Push up the middle part of the faucet
● Push the middle part of the faucet with your index finger
Search for any notches in the seal
● While bending the seal, push down lightly around the edges
Match the notches in the seal to the slots in the faucet
● Turn the faucet with your hand with the seal left loose as is
評価
53
翻訳 / 英語
- 2013/08/29 23:02:38に投稿されました
Return the main body back to the horizontal and get rid of the water by repeating the water dumpage 2-3 times
6. Repeat the steps 2-5 about 2 times.
7. Dumo the water from the water supply tank, and wipe up the remaining water drops on the bottom of it with a towel.
8. If the packing of the tab should come off
Push the middle part of the tab upward.
●Press the middle part of the tab with your index finger.
Search for the convex part of the tab.
● While bending the packing of the tab gently push the edge downward.
Make he convex part of the tab packing and the conkave part meet.
● Turn the tab packing while floating.
6. Repeat the steps 2-5 about 2 times.
7. Dumo the water from the water supply tank, and wipe up the remaining water drops on the bottom of it with a towel.
8. If the packing of the tab should come off
Push the middle part of the tab upward.
●Press the middle part of the tab with your index finger.
Search for the convex part of the tab.
● While bending the packing of the tab gently push the edge downward.
Make he convex part of the tab packing and the conkave part meet.
● Turn the tab packing while floating.
![[削除済みユーザ]](https://secure.gravatar.com/avatar/695023b4efd563721d13716b1457bc73.png?d=identicon&mode=crop&r=PG&s=42)
評価
45
翻訳 / 英語
- 2013/08/29 23:07:36に投稿されました
● Place the unit horizontally, repeat removal operation 2-3 times to remove the water
6, Repeat steps 2 - 5 (internal) around 2 times.
7, Discard the water in the water tank, wipe off the droplets from the unit and the water tank using a towel.
Reattaching the Water Hydrant's Packing
Push the middle portion of the water hydrant
● Press the middle part of the hydrant with the index finger
Look for the convex portion of the hydrant packing
● While divert water tap packing, pressing down lightly on the edge
Hydrant packing
Combine the concave and the convex portion of the water hydrant
● turn the floating water tap packing by hand
6, Repeat steps 2 - 5 (internal) around 2 times.
7, Discard the water in the water tank, wipe off the droplets from the unit and the water tank using a towel.
Reattaching the Water Hydrant's Packing
Push the middle portion of the water hydrant
● Press the middle part of the hydrant with the index finger
Look for the convex portion of the hydrant packing
● While divert water tap packing, pressing down lightly on the edge
Hydrant packing
Combine the concave and the convex portion of the water hydrant
● turn the floating water tap packing by hand
