[Translation from Japanese to English ] If this camera functions properly, the shutter is set by pulling the shutter ...

This requests contains 238 characters . It has been translated 3 times by the following translators : ( gonkei555 , yakuok , tomoko16 ) and was completed in 0 hours 40 minutes .

Requested by yoshidama at 15 Nov 2011 at 02:05 3373 views
Time left: Finished

このカメラが正常に動く場合、シャッターチャージレバーを引くことで、シャッターがセットされる。そして、シャッターレバーを押すと、シャッターが切れる。ところが、今回届いたカメラは、シャッターを切るためのチャージができない。つまり、内部でシャッターをチャージするためのスプリングが劣化している。これは輸送中に生じる症状ではない。明らかに、以前からこのような状態であったはずである。
さらに、本来は正面に付いている部品が欠落した箇所が見えないように、影になるように撮影している。悪質だ。

When this camera functions normally, the shutter is put to set whenever the shutter charge lever is shifted. And when the shutter lever is pushed, the shutter is released. However, the camera you sent me does not allow me to charge it for releasing the shutter. This means that a spring inside the camera which allows the shutter to be charged is deteriorated. This problem cannot be caused during the shipment. It is pretty obvious that the camera had been in this condition for some time even before the shipment.
Adding to that, the photo was taken from such an angle that the fallen piece in the front part of the camera cannot be seen in the photo. This act is totally pernicious.

Client

Try “Standard Translation” for specialized translation such as business purpose.

  • We can receive files such as Word, Excel, and PowerPoint.
  • There is no maximum word limit, and we deliver translations fast.
  • Higher-skilled translators will work on your request.

Feel free to contact
anytime