Camberは元々火災探知機の設置を考慮した設計ではない。LCPには火災探知信号を受け取り、AHUを止めるinterfaceはある。なので、あなたのほうで信号を出してくれることが必要です。どうしても火災探知機を設置したい場合は、穴の位置と大きさを教えて頂ければ、現場で開けることは可能です。私たちは火災探知機メーカーではないので、出荷前にchamberに火災探知機を設置することはできない。設置はメーカーがやるので、中国に代理店があるメーカーを探すことをお勧めします。
評価
51
翻訳 / 英語
- 2022/08/03 11:20:54に投稿されました
Basically, Camber doesn't have the design by considering the smoke detector installation.
LCP has the interface to receive the smoke detecting signal and stop AHU.
So, you need to give the signal on your side.
If you need to equip the detector, we can create a hole on the field when you designate the location and size.
We are not the manufacturer of the smoke detector, so can not set the detector in chamber before the shipment.
The installation would be done by the manufacturer, so we recommend you to look for the maker which has the agency in China.
LCP has the interface to receive the smoke detecting signal and stop AHU.
So, you need to give the signal on your side.
If you need to equip the detector, we can create a hole on the field when you designate the location and size.
We are not the manufacturer of the smoke detector, so can not set the detector in chamber before the shipment.
The installation would be done by the manufacturer, so we recommend you to look for the maker which has the agency in China.
評価
50
翻訳 / 英語
- 2022/08/03 11:12:12に投稿されました
Camber is not originally designed taking into account installation of fire detector. LCP has an interface that receives fire detection signals and stops AHU. Therefore, you need to provide the signal from your end. In case you really want to install a fire detector, we can make a hole at the site if you can tell us the location and size of the hole. Please note that we are not a manufacturer of fire detector, and it is not possible to install a fire detector on the chamber prior to shipment. The manufacturer will take care of such installation and we recommend you to find a manufacturer that has a distributor in China.
評価
55
翻訳 / 英語
- 2022/08/03 11:15:54に投稿されました
Camber was not originally designed with fire detection installations in mind; the LCP has an interface that receives fire detection signals and stops the AHU. So it is necessary for you to provide the signal on your end. If you really want to install a fire detector, please tell us the location and size of the hole, and we can open it on site. We are not a fire detector manufacturer, so we cannot install a fire detector in the chamber before shipping. The manufacturer will install it, so I recommend you to look for a manufacturer with a distributor in China.
