並び順番は上から下へ
視点は誰か？
誰がその要領書で作業しても、同じ出来栄えの品物ができること。
作業者に判断（考え）させる内容は極力避け、誰でも解る表現にする。
実作業の風景写真
前工程の出来栄えチェック
作業完了後の出来栄えチェック
明確な判定基準
その他の記載要件
最新図面の確認を行う
設計変更の確認
ビスは２.５Ｎ・mで締付けること（２ヶ所）
定量値で示し、作業者に度合いを判断させない
パッキンを指で触り破れ、浮き無き事
スクリュは欠品、浮き無き事
クランプは欠品無き事
ビスを指で触って５ｹあること
評価
57
翻訳 / 英語
- 2015/04/21 16:19:01に投稿されました
Order them from top to bottom.
Whose point of view?
Anyone can make products of the same performance with the instruction manual.
Avoid the content that makes the worker to judge (think) as much as possible, and use the expression that anyone can understand.
The photo showing actual work
Performance check of preparing process.
Performance check after the work completion
Clear judgment standard
Other description requirements
Check the latest drawing.
Confirmation of the design change
Screws should be tightened with 2.5N · m (2 places).
It should be shown in the quantitative value, and do not let the workers judge the performance.
Packing should not be torn by fingers. No lifting.
There should be no stock-out of screws.
There should be no stock-out of clamps.
Check that there are 5 screws by finger-touching.
karalakaralakaさんはこの翻訳を気に入りました
Whose point of view?
Anyone can make products of the same performance with the instruction manual.
Avoid the content that makes the worker to judge (think) as much as possible, and use the expression that anyone can understand.
The photo showing actual work
Performance check of preparing process.
Performance check after the work completion
Clear judgment standard
Other description requirements
Check the latest drawing.
Confirmation of the design change
Screws should be tightened with 2.5N · m (2 places).
It should be shown in the quantitative value, and do not let the workers judge the performance.
Packing should not be torn by fingers. No lifting.
There should be no stock-out of screws.
There should be no stock-out of clamps.
Check that there are 5 screws by finger-touching.
評価
52
翻訳 / 英語
- 2015/04/21 16:44:54に投稿されました
Sort order is from the top to the bottom.
who is the point of view?
Even if anyone works with a manual book, an article of the same workmanship should be done.
The content to be determined (thought) to the worker should be avoided as much as possible, the representation which anyone can understand should be used.
Landscape photo of actual work.
Workmanship check of the previous process
Workmanship check after work completion
Clear criteria
Other description requirements
Confirmation of the latest drawing
Confirmation of design changes
Screws should be tighten with 2.5N · m (at 2 places)
Quantitative values should be indicated, the operator should not determine the degree of tightness.
Packing is touched by finger and should not be tearing and floating.
Screw should not be missing and floating.
Clamp should not be missing.
There are 5 screws by touching with finger.
who is the point of view?
Even if anyone works with a manual book, an article of the same workmanship should be done.
The content to be determined (thought) to the worker should be avoided as much as possible, the representation which anyone can understand should be used.
Landscape photo of actual work.
Workmanship check of the previous process
Workmanship check after work completion
Clear criteria
Other description requirements
Confirmation of the latest drawing
Confirmation of design changes
Screws should be tighten with 2.5N · m (at 2 places)
Quantitative values should be indicated, the operator should not determine the degree of tightness.
Packing is touched by finger and should not be tearing and floating.
Screw should not be missing and floating.
Clamp should not be missing.
There are 5 screws by touching with finger.
