有効期限は検査から１年間が多いですが、精度の変動が小さいものは２～３年もあります。
トルクレンチは計測器ではありませんが、ねじ締めトルクを一定にするため設定値（トルク値）の管理をします。
これは毎月実際のトルク値をトルクテスターによって測定し、基準値内（設定値の±７％）にあることを確認します。
検査と試験の違い
製品の品質特性の測定を行ってそれが規格内であるかどうかを判定する作業を検査という。
品質管理では品質の測定を行って調べるだけの作業を試験といい検査とは区別しています。
当て方
評価
52
翻訳 / 英語
- 2015/03/10 19:13:16に投稿されました
Expiration period is often one year from inspection, it may also be two to three years for products that have small fluctuations in accuracy.
Although torque wrench is not a measuring instrument, it will control the setting value (torque value) that are meant to tighten screw torque.
This is to confirm that by using monthly actual torque value measured by torque tester, relative values (set value ± 7%) are within the standard value.
Differences in inspection and testing
Inspection is meant to determine whether or not the product is within the standard by determining the quality characteristics of the product.
Testing is meant to conduct quality measurement in quality management, so it is different from inspection.
Object party
pre23さんはこの翻訳を気に入りました
Although torque wrench is not a measuring instrument, it will control the setting value (torque value) that are meant to tighten screw torque.
This is to confirm that by using monthly actual torque value measured by torque tester, relative values (set value ± 7%) are within the standard value.
Differences in inspection and testing
Inspection is meant to determine whether or not the product is within the standard by determining the quality characteristics of the product.
Testing is meant to conduct quality measurement in quality management, so it is different from inspection.
Object party
評価
50
翻訳 / 英語
- 2015/03/11 12:55:25に投稿されました
In most cases, the expiration date would be a year from the date of inspection, but if the variation of accuracy is minor, some cases may be good for 2 to 3 years, too.
Torque wench is not a measurement device, but in order to stabilize the screwing torque, the setting value (torque value) will be managed. This is to measure the actual monthly torque value by the torque tester to confirm the value is within the standard (± 7% of the set value).
Difference between inspection and examination
Inspection shall mean the judgment work measuring the quality characteristics of a product to see if it is within the standard range.
In quality management, the work simply measures and investigates the quality means examination, so they are differentiated.
How to hit it
Torque wench is not a measurement device, but in order to stabilize the screwing torque, the setting value (torque value) will be managed. This is to measure the actual monthly torque value by the torque tester to confirm the value is within the standard (± 7% of the set value).
Difference between inspection and examination
Inspection shall mean the judgment work measuring the quality characteristics of a product to see if it is within the standard range.
In quality management, the work simply measures and investigates the quality means examination, so they are differentiated.
How to hit it
