The knob and handle blank are constructed from 6061 Aluminum. The center to center handle length is about 3.75". The hollow aluminum knob is extremely light weight and incredibly comfortable. The knob and handle blank comes in BLACK only.
Attaching the Knob to the Handle Blank:
First, remove the Philips head screw from the bottom of the knob. Keep the large washer on the internal knob pin as the washer is positioned between the knob and the handle blank; not between the knob and the Philips head screw.
ハンドル金属板に、ノブを取り付けます。
まず、ノブの底に付いているプラスネジを、取り外します。 ノブの内部の大きな座金を外さないようにしながら、ノブとハンドル金属板の間に、座金が来るように留め針で固定します。 ノブとプラスネジの間に、間違って入れないように気をつけましょう。
To attach the knob to the handle blank, you must unscrew the two halves of the knob. Place a normal screw driver into the bottom half of the knob and use the screw driver to push the internal pin past the bottom of the knob.
Place a small amount of Loctite Blue 242 into the opening of the internal pin.
Attach the Philips head screw thru the handle blank into the knob. With the normal screw driver inserted into the top of the pin to prevent rotation, tighten the Philips head screw.
