Aは紙の樹脂が含浸されたリボンを一定の角度で巻きながら、焼成して作られています。リボンは一定の間隔で波打っており、リボンの凹凸同士がくっつくことで穴を形成します。
穴の大きさはコントロール不可能ですので、整流性は圧力損失の規格値を設けて管理しています。
（エアーを流して測定します。）
ですので、品質に大きなバラツキは無いようにしております。
評価
50
翻訳 / 英語
- 2020/01/09 19:03:30に投稿されました
As for A, resin of paper is rolling the impregnated ribbon by certain angle, and is made by firing. The ribbon waves by a certain interval,and makes a hole by where unevenness of the ribbon touches each other.
As it is impossible to control size of the hole, we control rectification by setting the standard value of loss of pressure.
(We measure by flowing the air.)
For this reason, we try that quality is not dispersed on large scale.
As it is impossible to control size of the hole, we control rectification by setting the standard value of loss of pressure.
(We measure by flowing the air.)
For this reason, we try that quality is not dispersed on large scale.
評価
52
翻訳 / 英語
- 2020/01/09 19:05:58に投稿されました
A is made of firing and winding at constant speed of ribbon soaked of resin of paper. Ribbon is formed waving at also constant space respectively, the hole is shaped for attaching ribbon unevenly.
The size of hole is uncontrollable, therefore, rectification is managed with the standard value of pressure loss(measuring to flow air).
So that we keep the quality of product in order to get rid of large variation.
The size of hole is uncontrollable, therefore, rectification is managed with the standard value of pressure loss(measuring to flow air).
So that we keep the quality of product in order to get rid of large variation.
評価
50
翻訳 / 英語
- 2020/01/09 19:01:30に投稿されました
A is made by firing a ribbon impregnated with paper resin while winding it at a certain angle. The ribbon is wavy at regular intervals, and the unevenness of the ribbon sticks together to form a hole.
Since the size of the hole cannot be controlled, rectification is controlled by the standard value of pressure loss.
(We will measure it by blowing air.)
Therefore, there is no big difference in quality.
Since the size of the hole cannot be controlled, rectification is controlled by the standard value of pressure loss.
(We will measure it by blowing air.)
Therefore, there is no big difference in quality.
