1枚目の写真はセラミックのカバーが付いていて標準の仕様です。（端子渡しの仕様）
カバーの目的は端子の保護、及び絶縁のための部品です。
2枚目はアイロンプラグの端子のため、セラミックのカバーが付いていません。
接続を金属製にしたいとはどのようなことでしょうか？
セラミックのカバーを外すと接続部の金属製のネジ部が出てきます。
2枚目のようにアイロンプラグにしたいということでしたら、電圧が対応していないため出来ません。
（アイロンプラグは250V 20Aまで）
評価
52
翻訳 / 英語
- 2018/11/19 14:44:24に投稿されました
The first picture is a ceramic cover, and its specification is standard. (Specification of joining terminal)
The cover is for protecting and insulating the terminal.
The second one doesn’t have the ceramic cover due to iron plug terminal.
What does it mean to change the connection into metallic?
When the ceramic cover is removed, the metallic thread part of connection appears.
If you want the iron plug such as second one, it is impossible as the voltage is not supported.
(The iron plug supports up to 250V 20A.)
The cover is for protecting and insulating the terminal.
The second one doesn’t have the ceramic cover due to iron plug terminal.
What does it mean to change the connection into metallic?
When the ceramic cover is removed, the metallic thread part of connection appears.
If you want the iron plug such as second one, it is impossible as the voltage is not supported.
(The iron plug supports up to 250V 20A.)
評価
50
翻訳 / 英語
- 2018/11/19 13:59:22に投稿されました
The first picture is of a standard specification which comes with a ceramic cover (for bridging terminals).
The purpose of the cover serves as an insulation part for terminal protection.
The second picture does not come with a ceramic cover because it is an iron plug terminal.
What do you mean by saying that you wish to replace the connection with a metal?
Removing the ceramic cover will expose a metal screw on the connection part.
If you mean by saying that you wish to iron plug as shown in the second picture, it is not possible because the voltage is not compatible.
The purpose of the cover serves as an insulation part for terminal protection.
The second picture does not come with a ceramic cover because it is an iron plug terminal.
What do you mean by saying that you wish to replace the connection with a metal?
Removing the ceramic cover will expose a metal screw on the connection part.
If you mean by saying that you wish to iron plug as shown in the second picture, it is not possible because the voltage is not compatible.
評価
50
翻訳 / 英語
- 2018/11/19 14:07:33に投稿されました
The first photo shows an ordinal usage with the ceramic cover. (used for the joint terminal)
The purpose of the cover is protecting the terminal and for an electronic insulation.
The product in the second photo does not have a ceramic cover because of the iron plug terminal.
How would you mean by converting the joint to metal?
When you remove the cover, the metal screw of the joint will be appearing.
If you wish to convert to the iron plug like the one in the second photo, it would be impossible due to the issues of a voltage. (Iron plug should not be exceeded 250 V 20 A.)
The purpose of the cover is protecting the terminal and for an electronic insulation.
The product in the second photo does not have a ceramic cover because of the iron plug terminal.
How would you mean by converting the joint to metal?
When you remove the cover, the metal screw of the joint will be appearing.
If you wish to convert to the iron plug like the one in the second photo, it would be impossible due to the issues of a voltage. (Iron plug should not be exceeded 250 V 20 A.)
