切断寸法確認
木型にて形状確認
切断加工方向の確認
切断寸法の確認
木型上の基準線(青又は黒）を基に罫引きを行う
切断治具セット
罫引き線とカッターの刃を合わせる
パイプセット治具をセットする
試し切断
カッターを回転させ試し切断を行う
寸法確認
切断した製品を木型に入れる
切断したワークが基準線にあるか確認する
切断端面が真直であるか確認
OKなら流動に入る
流動
セットされた治具にワークをセットして切断する
5本毎に切断確認とエアーブローを実施し、収納する
必ず木型を使用する事
真直度確認
評価
57
翻訳 / 英語
- 2015/05/22 11:27:01に投稿されました
Cutting dimension check
Shape check with wood pattern
Check of cutting and processing direction
Cutting size check
Do the ruling based on the reference line (blue or black) on the wood pattern
Cutting jig setting
Align the cutter blade with the ruling line
Se the pipe set jig
Trial cutting
Do a trial cutting by rotating the cutter
Dimension check
Put the cut product in the wooden pattern
Check if the cut work is on the reference line
Check if the cut edge is straight
If it is OK, enter to the flow
Flow
Set the work with the set jig and cut it
Check the cutting and do the air blowing at every 5 pieces, and store them.
Be sure to use the wood pattern
Straightness check
Shape check with wood pattern
Check of cutting and processing direction
Cutting size check
Do the ruling based on the reference line (blue or black) on the wood pattern
Cutting jig setting
Align the cutter blade with the ruling line
Se the pipe set jig
Trial cutting
Do a trial cutting by rotating the cutter
Dimension check
Put the cut product in the wooden pattern
Check if the cut work is on the reference line
Check if the cut edge is straight
If it is OK, enter to the flow
Flow
Set the work with the set jig and cut it
Check the cutting and do the air blowing at every 5 pieces, and store them.
Be sure to use the wood pattern
Straightness check
評価
50
翻訳 / 英語
- 2015/05/22 13:32:04に投稿されました
Cutting dimension confirmation
The shape confirmed by wooden
Checking the cutting direction
Confirmation of the cut size
I do ruling wooden on the reference line (blue or black) based on
Cutting jig set
Adjust the blade of the ruling line and cutter
You want to set the pipe set jig
Try cutting
And performs a trial cutting to rotate the cutter
Dimensions confirmation
Add the cut the product to the wooden mold
It is checked whether the cut work is in the reference line
Check whether the cutting edge is straight
Enter to the OK if liquidity
Flow
It is cut by setting the workpiece to the set jig
The disconnection confirmation and the air blow was carried out in five each, to accommodate
Be sure to use a wooden
Straightness confirmation
The shape confirmed by wooden
Checking the cutting direction
Confirmation of the cut size
I do ruling wooden on the reference line (blue or black) based on
Cutting jig set
Adjust the blade of the ruling line and cutter
You want to set the pipe set jig
Try cutting
And performs a trial cutting to rotate the cutter
Dimensions confirmation
Add the cut the product to the wooden mold
It is checked whether the cut work is in the reference line
Check whether the cutting edge is straight
Enter to the OK if liquidity
Flow
It is cut by setting the workpiece to the set jig
The disconnection confirmation and the air blow was carried out in five each, to accommodate
Be sure to use a wooden
Straightness confirmation
