吊り具挿入
コイル材の取り付け
吊り具をスプールの上部の穴に挿入する。
コイル材を吊り上げる。
コイル材をコイル材スタンドまで移動する。
スプール中央の穴をコイル材スタンド軸に合わせ、コイル材をセットする。
スプール固定金具を取り付ける。
ストッパーを取り付ける。
ストッパーのボルトを締め付ける。
吊り具をスプールから抜く。
ホイストクレーンの格納
所定の場所に移動する。
吊り具をフックへ戻す。
周囲に人がいないことを確認してから作業すること。
ストッパーは固定金具を外す直前まで取り付けたままにすること
![[deleted user]](https://secure.gravatar.com/avatar/695023b4efd563721d13716b1457bc73.png?d=identicon&mode=crop&r=PG&s=42)
Rating
52
Translation / English
- Posted at 21 May 2015 at 16:38
Insert a hoisting accessory
Install a coil stock
Insert a hoisting accessory into a hole of upper part of a spool.
Pull up a coil stock.
Move a coil stock to a coil stock stand.
Set a coil stock by adjusting a hole of a center spool to a stand axis of a coil stock.
Install a fixing fitting of a spool.
Insert a stopper.
Tighten a bolt of a stopper.
Pull out a hoisting accessory from a spool.
Housing a hoist crane
Move to a specified place.
Return a hoisting accessory to a hook.
Work this after making sure that there is no one around.
Leave a stopper instal until just before a fixing fitting is removed.
Install a coil stock
Insert a hoisting accessory into a hole of upper part of a spool.
Pull up a coil stock.
Move a coil stock to a coil stock stand.
Set a coil stock by adjusting a hole of a center spool to a stand axis of a coil stock.
Install a fixing fitting of a spool.
Insert a stopper.
Tighten a bolt of a stopper.
Pull out a hoisting accessory from a spool.
Housing a hoist crane
Move to a specified place.
Return a hoisting accessory to a hook.
Work this after making sure that there is no one around.
Leave a stopper instal until just before a fixing fitting is removed.
Rating
50
Translation / English
- Posted at 21 May 2015 at 15:38
Inserting lifter
Installation of a rolled coil
Insert a lifter into a hole located upward on the spool
Lift a rolled coil
Move a rolled coil to a rolled coil stand
Fit the center hole of spool to the axes of the rolled coil stand, and set the rolled coil
Attach spool fixed metal fitting
Attach stopper
Tighten stopper bolt
Remove lifter off spool
Storage of cranes with hoist
Move cranes to the designated location
Return lifter to hook
Make sure there is no people around before you operate
Stopper should be kept attached until removal of fixed metal fitting
akaakaa likes this translation
Installation of a rolled coil
Insert a lifter into a hole located upward on the spool
Lift a rolled coil
Move a rolled coil to a rolled coil stand
Fit the center hole of spool to the axes of the rolled coil stand, and set the rolled coil
Attach spool fixed metal fitting
Attach stopper
Tighten stopper bolt
Remove lifter off spool
Storage of cranes with hoist
Move cranes to the designated location
Return lifter to hook
Make sure there is no people around before you operate
Stopper should be kept attached until removal of fixed metal fitting
