曲げ行程で寸法不良発生
メーカー車両組付け時ワークがちぎれる
切断の完了
パイプガイドからパイプを抜き取る
全数チェックをおこなうこと
各ゲージ挿入は無理なく入ること
現在加工中の切断長にプラス１００ｍｍを入力して２本切断後赤箱へ廃却すること
外径チェックゲージが無理なく通ること
切断面のバラツキをチェック
キズは両端から３０mm以内を全周見る
不良品（寸法・キズ・曲がり）は即折り曲げ不良品箱へ入れること
曲がりが大きければ矯正ロ－ラ－で調整する
寸法不良が流出する
手が巻き込まれる恐れがある
外れ止め
評価
52
翻訳 / 英語
- 2015/05/20 22:43:51に投稿されました
The forming defective happened in the bending process.
The work broke away in the process of building the maker assembly.
The cut has finished.
To extract the pipe from its pipe guide.
Check all the numbers.
Insert each gauge without too much power.
Add more 100mm to the cut length which is now being processed, cut two pipes and put it away into the red box.
The gauge for checking the outside diameter should pass through without any pressure.
Check the sections whether their size are varied.
Look around the sections in 30mm from their both sides and find out whether they have any injury.
The defective, such as failed forming, injured and curved, should be immediately bended and put away into the defective box.
If the curve is wrongly big, adjust it with the straightening roller.
The forming defective flows out.
Your hands could be caught in the machine by mistake.
The latch system.
is3ggo1ioさんはこの翻訳を気に入りました
The work broke away in the process of building the maker assembly.
The cut has finished.
To extract the pipe from its pipe guide.
Check all the numbers.
Insert each gauge without too much power.
Add more 100mm to the cut length which is now being processed, cut two pipes and put it away into the red box.
The gauge for checking the outside diameter should pass through without any pressure.
Check the sections whether their size are varied.
Look around the sections in 30mm from their both sides and find out whether they have any injury.
The defective, such as failed forming, injured and curved, should be immediately bended and put away into the defective box.
If the curve is wrongly big, adjust it with the straightening roller.
The forming defective flows out.
Your hands could be caught in the machine by mistake.
The latch system.
評価
52
翻訳 / 英語
- 2015/05/21 02:00:10に投稿されました
A defective product was produced at the bending process.
A work was torn off during manufacturer's body assembly.
Completion of cutting.
Remove pipes from the pipe guide.
Confirm the total number.
Each gauge should be inserted without forcing.
Cut two pieces by entering additional 100mm to the pieces being processed, and dispose in the red box.
Outer circumference check: gauge needs to pass through freely.
Check the cut surface for uniformity.
Inspect 30mm from both ends and circumferencially for scratches.
Defective products (dimensions, scratches, bend) need to be placed in defective products box immediately.
When the bend is excessive, use correction roller to adjust.
Parts in wrong dimensions go into circulation
Possibility of hands being caught
Detachment stop
is3ggo1ioさんはこの翻訳を気に入りました
A work was torn off during manufacturer's body assembly.
Completion of cutting.
Remove pipes from the pipe guide.
Confirm the total number.
Each gauge should be inserted without forcing.
Cut two pieces by entering additional 100mm to the pieces being processed, and dispose in the red box.
Outer circumference check: gauge needs to pass through freely.
Check the cut surface for uniformity.
Inspect 30mm from both ends and circumferencially for scratches.
Defective products (dimensions, scratches, bend) need to be placed in defective products box immediately.
When the bend is excessive, use correction roller to adjust.
Parts in wrong dimensions go into circulation
Possibility of hands being caught
Detachment stop
翻訳していただき、本当にありがとうございました。