Prevent Unwanted Reflection Towards the Light Source Spectrally Flat VIS and NIR Ranges Available For OEM applications, the coating can be applied to a variety of substrate options.Calcium Fluoride, Germanium, and Zinc Selenide Substrates Used to Achieve a 90° Light Path Bend
光源への不要な反射を防止水平スペクトル可視・近赤外領域に対応OEMの場合には、コーティングにさまざまな素材の選択が可能となっております。素材例: フッ化カルシウム、ゲルマニウム、セレン化亜鉛90°の光路屈曲の達成に使用可
Zinc Selenide is commonly used with CO2 laser applications, and features high transmission from 1 - 16μm.Uncoated prisms utilize total internal reflection for the right angle path bend, and are ideal for well-collimated light sources.Please contact our Applications Engineering Department for applications requiring anti-reflective or metallic coatings.
セレン化亜鉛は炭酸ガスレーザー光線への対応に用いられるのが一般的で、1~16マイクロメートルという高い透過性能が特徴です。 コーティングなしのプリズムは内反射全体を利用して直角に光路を曲げるため、高度の集束光源に適しています。 反射防止コーティングないし金属コーティングが求められる場合には、当社の応用技術部までご相談ください。
Our infrared Right Angle Prisms are available in 3 substrate options. Calcium Fluoride is a low index (1.434) material with excellent transmission properties from 190nm to 7μm, making it ideal for applications throughout the UV, Visible, and Infrared Spectra. Germanium is a dense material with a high index, making it ideal for applications in the 3 - 12μm region where the optical path length needs to be maximized.
当社の赤外線直角プリズムでは三種類の素材が選択できます。フッ化カルシウムは1.434と低指数を示す素材で、透過性能も190ナノメートルから7マイクロメートルと優秀なため、紫外線・可視光線・赤外線の各スペクトルすべてへの対応に適しています。ゲルマニウムは高指数を示す高密度の素材で、最大の光路長が要求されるような3~12マイクロメートルの波長域への対応が適しています。
Our Neutral Density Filters are designed to evenly attenuate a light source while preventing unwanted back reflections. A proprietary coating design minimizes reflection to less than 2%, while maintaining very high neutrality over the entire design spectral range. Available for visible applications from 400-700nm or NIR applications from 700-1200nm, the filters are ideal for limiting the transmission of broadband halogen, fluorescent, and tungsten sources, as well as low power lasers.
当社のNDフィルターは、光源を均等に弱めると同時に不要な後方反射は取り除くように設計されています。独自開発のコーティング設計により反射は2%以下にまで抑えこむとともに、全スペクトル域にわたりきわめて高い減光性能を維持しています。400~700ナノメートルの可視光線域から700~1200ナノメートルの近赤外線域にまで及ぶことから、広帯域のハロゲン・蛍光・タングステン光源および低出力レーザーを限定的に透過させる用途に適しています。
Cold Mirrors feature a multi-layer dielectric coating optimized for >95% reflection for visible light and >90% transmission for IR wavelengths. Cold mirrors are designed for use in any application where heat build-up can cause damage or adverse effects. For high power illumination, forced air cooling is recommended.
コールドミラーの特質は、可視光線を95%以上反射し、赤外線の波長は90%以上透過するように最適化された誘電性の多層コーティングである点です。コールドミラーは、蓄熱により障害や悪影響が及ぼされるあらゆるケースに使用できる設計となっています。照度の高い場合は、強制空気冷却が推奨されます。
Hot Mirrors feature a multi-layer dielectric coating optimized for >95% reflection for IR wavelengths and >90% transmission for visible light. Hot mirrors are used primarily projection and illumination systems, the multi-layer dielectric coating on the mirrors reflects harmful infrared radiation (heat), while transmitting visible light. For high power illumination, forced air cooling is recommended.
ホットミラーの特質は、赤外線の波長を95%以上反射し、可視光線を90%以上透過するように最適化された誘電性の多層コーティングである点です。ホットミラーは主に映写システムや照明システムに用いられます。ミラー上の誘電性の多層コーティングが有害な赤外線(熱)を反射する一方で、可視光線は透過します。照度の高い場合は、強制空気冷却が推奨されます。