Translator Reviews ( English → Spanish )
Rating: 53 / Native Spanish / 0 Reviews / 01 Jun 2017 at 05:49
The vehicle is ready for painting
The paint used is a two coats paint (one coat of base coat, one coat of clear coat)
In reality, 2 to 3 coats of base coat and 2 to 3 coats of clear coat are required
Dilute the base coat to 70%
For 300 ml of base coat, add 300 * 0.7 = 210 ml of thinner
Spray the paint begining with the surfaces covered by the primer
Do not turn the wrist: grip the gun keeping perpendicular with the spraying area
Release the trigger at the ends of the trajectories to avoid applying too much paint at the ends
Then apply 2 to 3 coats of base coat over the entire body
Just wait for the base coat to dry to the touch to apply the next coat
The base coat dries quickly: about 10 minutes between coats
El vehículo está listo para ser pintado
La pintura usada son dos capas de pintura (una capa de capa base, una capa de barniz)
En realidad, 2 a 3 capas de capa base y 2 a 3 capas de barniz son requeridas
Diluya la capa base al 70%
Para 300 ml de capa base, añada 300 * 0.7 = 210 ml de solvente
Rocíe la pintura comenzando con las superficies cubiertas con la imprimación
No mueva la muñeca: agarre la pistola manteniéndola perpendicular al área de rociado
Suelte el gatillo al final de las trayectorias para evitar aplicar mucha pintura en los extremos
Luego aplique 2 a 3 capas de capa base sobre el cuerpo entero
Sólo espere a que la capa base se seque al tacto para aplicar la siguiente capa
La capa base se seca rápidamente: alrededor de 10 minutos entre capas