本機はマガジンケースに収納されているハイブリッド基板（ICやコンデンサー等を搭載）を一枚ずつ測定部に供給、指定の温度で電気的特性検査を行い、その後良品と不良品に分類し、各々のマガジンケースに収納する装置です。
また、空になったマガジンを収納側へ搬送して使用する仕様を付加することも可能です。
同時搭載可能チップは2種類あり、ダイサリング及びチップトレーにて供給します。
基板の供給と収納は、マガジン単位で行います。
また、素子搭載後の検査機能を有しボンディング後の品質管理が可能です。
評価
52
翻訳 / 英語
- 2013/12/17 12:48:26に投稿されました
This device feeds the hybrid circuit boards (mounted with IC, condensor, etc.) one by one, which is housed in the magazine case, to the measuring point, and then conducts the inspection of electirical properties at a designated temperature, and further sorts the measured circuit boards to defective and non-defective ones, and finally place them into respective magazine cases.
A function can be added as an option, with which emptied magazines can be forwarded to the housing side.
There are two chips which can be mouted simultaneously, for feeding either by dicering and by the chip tray.
Feeding and housing of the circuit boards are done by each magazine basis.
This also has the function of inspection after the module is mounted, so it is possible to control the quality after bonding .
A function can be added as an option, with which emptied magazines can be forwarded to the housing side.
There are two chips which can be mouted simultaneously, for feeding either by dicering and by the chip tray.
Feeding and housing of the circuit boards are done by each magazine basis.
This also has the function of inspection after the module is mounted, so it is possible to control the quality after bonding .
![[削除済みユーザ]](https://secure.gravatar.com/avatar/695023b4efd563721d13716b1457bc73.png?d=identicon&mode=crop&r=PG&s=42)
評価
52
翻訳 / 英語
- 2013/12/17 12:40:51に投稿されました
This equipment takes out the hybrid PCB one by one stored in the magazine case and supplies it to the temperature characteristics inspection section where it is tested for the temperature characteristics under preset temperature, and then, the tested PCB is stored to the magazine case one by one.
Also, it is capable of adding the specification for transferring the empty magazine case to the place where tested PCBs will be stored.
There are two types of simultaneously installable tips and those are supplied by the dicer ring and the tip tray.
The supply and the storage of PCB are performed per magazine unit.
And, the equipment also has the inspection function after the components are installed which enables the quality control after bonding the components.
toushisさんはこの翻訳を気に入りました
Also, it is capable of adding the specification for transferring the empty magazine case to the place where tested PCBs will be stored.
There are two types of simultaneously installable tips and those are supplied by the dicer ring and the tip tray.
The supply and the storage of PCB are performed per magazine unit.
And, the equipment also has the inspection function after the components are installed which enables the quality control after bonding the components.
