3-inchの配管内に流れるガスを62Sを使って計測したい。
しかし管内にあまり直管長さをとれません。
必要直管長さを教えてください。
241を使って4-inch配管内の蒸気を測定したい。
4-inch配管用に校正された241は、3-inch配管につけかえて使用することは可能ですか。
もしできるなら、その際気を付けることはありますか。
また、ユーザ側で特別にやらなければいけないことはありますか。
Rating
52
Translation / English
- Posted at 15 Jun 2015 at 06:52
I want to measure a gas that flows through a 3-inch pipe using 62S.
However, I cannot get a large amount of straight part in the pipe.
Let me know what the needed straight length is.
I want to measure steam in a 4-inch pipe using 241.
Is is possible to adopt 241 calibrated for a 4-inch pipe to a 3-inch pipe?
Also, is there anything specific we as a user need to do?
However, I cannot get a large amount of straight part in the pipe.
Let me know what the needed straight length is.
I want to measure steam in a 4-inch pipe using 241.
Is is possible to adopt 241 calibrated for a 4-inch pipe to a 3-inch pipe?
Also, is there anything specific we as a user need to do?
Rating
50
Translation / English
- Posted at 15 Jun 2015 at 07:02
I want to measure the gas flowing into the 3-inch pipe by using 62S.
But in the pipe there isn't enough tube for the straight pipe length.
Please tell me the required straight pipe length.
I want to measure a 4-inch steam in the pipe using a 241.
For a 4-inch plumb that has been calibrated for the pipe 241, is it possible to be replaced it with a 3-inch pipe?
If it is possible, have you ever paid attention at that circumstance?
In addition, have you ever had the need to do a special thing on the user side?
But in the pipe there isn't enough tube for the straight pipe length.
Please tell me the required straight pipe length.
I want to measure a 4-inch steam in the pipe using a 241.
For a 4-inch plumb that has been calibrated for the pipe 241, is it possible to be replaced it with a 3-inch pipe?
If it is possible, have you ever paid attention at that circumstance?
In addition, have you ever had the need to do a special thing on the user side?
