CKD部品において、電着塗装にキズ（擦れｷｽﾞ等）が発生していた
従来から“この程度のキズは問題ない”と曖昧なまま、流動していませんか？
作り手（製造）側からの立場だけで、外観を判断していませんか？
外観については、限度見本や定量値での管理でないと不良になります
コネクタの嵌合部にろう材が垂れ、相手部品組付け出来ない不具合が発生。
相手嵌合チェックはしていたが、いつも不良はなかった為、いつの間にかチェックが疎かになり、不良（ｺﾈｸﾀ隙間発生）を見逃してしまった。
茶色テーピング欠品
評価
52
翻訳 / 英語
- 2015/05/13 13:02:52に投稿されました
Regarding CKD parts, we can see scratches on electrodeposition coating.
Have not you made them flow with fuzzy thinking like "Scratches like this extent will not be problem"?
Have not you judged the external appearance only from the view point of manufacture?
Without management with a limit sample and quantitative value, the external appearance will be considered as a defective.
An error occurred that brazing material flowed on fitting parts of a connector and we cannot connect parts.
We have checked whether it fits together or not, but usually we cannot see any defectives. So the check has gradually been loose, and we missed the defective (a crack of connector).
A brown color tape is out of stock.
kaomorikaさんはこの翻訳を気に入りました
Have not you made them flow with fuzzy thinking like "Scratches like this extent will not be problem"?
Have not you judged the external appearance only from the view point of manufacture?
Without management with a limit sample and quantitative value, the external appearance will be considered as a defective.
An error occurred that brazing material flowed on fitting parts of a connector and we cannot connect parts.
We have checked whether it fits together or not, but usually we cannot see any defectives. So the check has gradually been loose, and we missed the defective (a crack of connector).
A brown color tape is out of stock.
評価
57
翻訳 / 英語
- 2015/05/13 13:57:03に投稿されました
In CKD parts, damage (scratches, etc.) has occurred on the electrodeposition coating.
Isn't it flowed from the past saying, "this degree of scratch is no problem"?
Isn't the appearance judged from the position of only the manufacturer?
As for appearance, it will be a failure unless it is managed by limited sample and quantitative value.
Failure occurred as follows: brazing filler material flowed on the attachment area of the connector, and the other component cannot be assembled.
Attachment check was done. However it became precarious before they knew. And the failure (connector clearance gap) was overlooked.
Brown taping shortage
Isn't it flowed from the past saying, "this degree of scratch is no problem"?
Isn't the appearance judged from the position of only the manufacturer?
As for appearance, it will be a failure unless it is managed by limited sample and quantitative value.
Failure occurred as follows: brazing filler material flowed on the attachment area of the connector, and the other component cannot be assembled.
Attachment check was done. However it became precarious before they knew. And the failure (connector clearance gap) was overlooked.
Brown taping shortage
![[削除済みユーザ]](https://secure.gravatar.com/avatar/695023b4efd563721d13716b1457bc73.png?d=identicon&mode=crop&r=PG&s=42)
評価
50
翻訳 / 英語
- 2015/05/13 13:50:47に投稿されました
Damages(e.g. scratches) on the electro-deposition coating:
Please keep remember to examine any damages even if it looks "tiny" and do not judge the condition of the products subjectively.
As for the exterior, we would like you to subject to our criteria samples or quantitative standards. Otherwise they will be considered as defective products.
Brazing on a joint of a connector was dripping and the joint could not be connected to the other part of connectors:
The other part of the connectors used to be well examined, but there had been any problems for long time, so the quality inspection gradually got loose. Thus, the defects was passed over.
Missing brown tapes.
Please keep remember to examine any damages even if it looks "tiny" and do not judge the condition of the products subjectively.
As for the exterior, we would like you to subject to our criteria samples or quantitative standards. Otherwise they will be considered as defective products.
Brazing on a joint of a connector was dripping and the joint could not be connected to the other part of connectors:
The other part of the connectors used to be well examined, but there had been any problems for long time, so the quality inspection gradually got loose. Thus, the defects was passed over.
Missing brown tapes.
ありがとうございました
コメント感謝致します。ありがとうございました。