電池1本で5Vを作り出せ!
単4電池1本から5Vを生成
O2の外部電源として利用可能
抵抗が低いTの高性能Iを採用
H採用
電池の電圧が高いほど電流を多く取り出せます
リンク先の翻訳をしてもらえれば$2のクーポンを差上げます
(訳したテキストを Aへ送ってください)
配線不要
EをSのように使おう
入手しやすくて安いRをSのように使える
差込むだけで利用可能
LED搭載
LやPを使わなければ必要な部品はEのみ
変更パッド搭載
Eで動作確認済
A利用時はR2は不要
C利用時はR3を使用
位置が間違っているので注意
Rating
50
Translation / English
- Posted at 04 Mar 2014 at 08:35
Produce 5 voltage from 1 battery.
5 voltage is produced from AAA cell battery.
Can be used as outside power supply of O2.
High performance I of T whose resistence is low is adopted.
Adopt H.
The higher the voltage is, the more current we can obtain.
We will give you 2 dollar coupon if you translated a website to which it is linked.
(Please send translated text to A).
Wiring is not required.
Use E as if it were S.
Can use R, which is easy to obtain and inexpensive, as if it were S.
Can be used only by plugging in.
LED is loaded.
If L and P are not used, required part is only E.
Pad for changing is loaded.
Action has been checked at E.
When A is used, R2 is not necessary.
When C is used, use R3.
The position is not correct, and please pay attention to it.
will2tt likes this translation
5 voltage is produced from AAA cell battery.
Can be used as outside power supply of O2.
High performance I of T whose resistence is low is adopted.
Adopt H.
The higher the voltage is, the more current we can obtain.
We will give you 2 dollar coupon if you translated a website to which it is linked.
(Please send translated text to A).
Wiring is not required.
Use E as if it were S.
Can use R, which is easy to obtain and inexpensive, as if it were S.
Can be used only by plugging in.
LED is loaded.
If L and P are not used, required part is only E.
Pad for changing is loaded.
Action has been checked at E.
When A is used, R2 is not necessary.
When C is used, use R3.
The position is not correct, and please pay attention to it.
Rating
52
Translation / English
- Posted at 04 Mar 2014 at 08:43
Generate 5V with one battery!
Create 5V from one AAA battery
Available as external power source
Apply the high-performance “I” of “T” whose impedance is low
Apply H
As the voltage of the battery is high, more current can be extracted.
If you translate the content of the following link, we will give you a coupon equivalent to $2.
(Please sent the translated text to A)
Wiring is not necessary.
Use E as S.
Easy to obtain and cheap R can be used as S.
You can use it only by inserting.
LED is equipped.
Only E part is needed if you do not use L or P.
Transmitting pad is equipped.
The operation check has been done with E.
When using A, R2 is not necessary.
When using C, R3 is necessary.
Be careful because the place is wrong.
will2tt likes this translation
Create 5V from one AAA battery
Available as external power source
Apply the high-performance “I” of “T” whose impedance is low
Apply H
As the voltage of the battery is high, more current can be extracted.
If you translate the content of the following link, we will give you a coupon equivalent to $2.
(Please sent the translated text to A)
Wiring is not necessary.
Use E as S.
Easy to obtain and cheap R can be used as S.
You can use it only by inserting.
LED is equipped.
Only E part is needed if you do not use L or P.
Transmitting pad is equipped.
The operation check has been done with E.
When using A, R2 is not necessary.
When using C, R3 is necessary.
Be careful because the place is wrong.
